Liebherr 7084376 - 03 operating instructions General safety information, Conformity, Saving energy

Page 3

General safety information

Climate

for ambient temperatures of

rating

 

SN

 

10 °C to 32 °C

 

 

 

N

16 °C to 32 °C

 

 

 

ST

16 °C to 38 °C

 

 

 

T

16 °C to 43 °C

 

 

 

1.3 Conformity

The refrigerant circuit has been tested for leaks. The appliance complies with current safety regulations and EC directives 2006/95/EC and 2004/108/EC.

1.4 External dimensions of the appliance

 

 

Fig. 2

 

 

 

 

Model

Height of appliance H (mm)

CN(es) 35..

 

1817

 

 

 

 

 

CN 39..

2011

 

 

 

 

 

CN(es/esf) 40..

2011

 

 

 

 

 

1.5 Saving energy

-

Always ensure good ventilation. Do not cover ventilation

-

openings or grille.

Always keep fan louvres clear.

-

Do not place appliance in areas of direct sunlight or next to a

-

stove, heater or similar object.

The energy consumption depends on the installation condi-

-

tions, e.g. the ambient temperature (see 1.2) .

Keep the time the appliance is open to a minimum.

-

Store food logically.

-

Ensure that all food is well packed and covered for storage.

-

This will prevent frost from forming.

First cool warm food to room temperature before storing it .

-

Defrost frozen food in the refrigerator.

-

Empty and switch off refrigerating unit for longer vacation

 

periods.

Accumulated dust increases the energy consumption:

-Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance.

2 General safety information

Danger for the user:

-This appliance is not designed for persons (including children) with physical, sensory or mental impairment or persons not having sufficient experience and knowledge, unless they are instructed in the use of the appliance and are initially super- vised by a person responsible for their safety. Keep children under supervision to ensure they do not play with the appli- ance.

-In case of a fault, pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

-Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.

-When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.

-Install and connect the appliance only as instructed.

-Please keep these instructions in a safe place and pass them on to any subsequent owners.

-All repairs to and intervention in the IceMaker may be carried out only by service personnel or by other skilled personnel trained for the purpose.*

-Special-purpose lamps (incandescent lamps, LEDs, fluores- cent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination.

Fire hazard:

- The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

Do not damage the refrigerant circuit pipes.

Do not allow naked flames or ignition sources to enter the appliance.

Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

If refrigerant escapes: eliminate naked flames or sources of ignition from the vicinity. Pull out the power plug. Venti- late the area well. Notify customer service.

-Do not store explosives or sprays using combustible propel- lants such as butane, propane, pentane, etc. in the appliance. Respective spray cans can be identified by reference to the contents printed on the can or by a flame symbol. Gases possibly escaping may ignite due to electrical components.

-Do not place any burning candles, lamps or other items with naked flames on or in the appliance.

-Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to elec- trical components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

-Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Please observe the specific information in the other sections:

 

 

DANGER

 

identifies a situation involving direct

 

 

 

 

danger which, if not obviated, may

 

 

 

 

result in death or severe bodily injury.

 

 

 

 

 

 

 

 

WARNING

 

identifies a dangerous situation

 

 

 

 

which, if not obviated, may result in

 

 

 

 

death or severe bodily injury.

 

 

 

 

 

 

3

Image 3
Contents Operating instructions Contents Appliance at a glanceAppliance at a glance Conformity General safety informationGeneral safety information External dimensions of the applianceControls and displays Controls and displaysPutting into operation Putting into operation Stack cabinet Installing the applianceInsertion into a row of kitchen units Transporting the applianceControl ControlRelocating the shelves Setting the temperatureUsing the sectioned shelf 3 FanFreezer compartment IceMaker Cold storage accumulatorsCleaning the IceMaker MaintenanceMaintenance Cleaning the applianceChanging the interior light with bulb Customer serviceMalfunction MalfunctionDecommissioning Switching off the applianceTaking the appliance out of service DecommissioningDisposing of the appliance

7084376 - 03 specifications

The Liebherr 7084376 - 03 is a cutting-edge component designed to enhance the performance and efficiency of Liebherr's extensive range of machinery. Known for its commitment to innovation, Liebherr integrates advanced features and technologies into its products, making the 7084376 - 03 a notable example of this endeavor.

One of the primary features of the Liebherr 7084376 - 03 is its robust construction, ensuring durability and reliability even in the most demanding working conditions. The material selection is paramount, with high-grade alloys used to withstand wear and tear, ensuring a long service life. This durability translates to reduced maintenance costs and increased uptime for users.

The 7084376 - 03 is equipped with state-of-the-art technologies that enhance its operational capabilities. One such technology is the advanced hydraulic system designed to optimize fluid dynamics. This system not only improves the efficiency of power transmission but also facilitates smoother operation, which is vital in handling heavy loads. Additionally, the hydraulic system is engineered to minimize energy consumption, making the machinery more eco-friendly.

Another significant characteristic of the Liebherr 7084376 - 03 is its innovative control interface. The user-friendly design allows operators to easily navigate through various settings and functionalities, promoting efficient use and quick adjustments as required. The interface is designed with intuitive visuals, ensuring that operators can focus on their tasks without getting bogged down by complex controls.

Moreover, the Liebherr 7084376 - 03 features advanced safety mechanisms. These include overload protection and automated alerts, which help prevent accidents and equipment failure. Safety is a crucial aspect of Liebherr’s design philosophy, and these features are a testament to their commitment to providing safe working environments.

In conclusion, the Liebherr 7084376 - 03 stands as a prime example of Liebherr's dedication to producing high-quality, innovative machinery components. Its robust construction, advanced hydraulic technologies, user-friendly control interface, and comprehensive safety features all contribute to its reputation as a reliable choice for operators. Whether in construction, mining, or other heavy-duty applications, the 7084376 - 03 is engineered to perform, ensuring efficiency and safety in challenging environments. As Liebherr continues to push technological boundaries, components like the Liebherr 7084376 - 03 are essential for achieving peak operational excellence.