Decommissioning, Disposing of the appliance

Decommissioning

uInsert the water tank.

→There is not enough water in the water tank. u Fill the water tank.

The LED of the IceMaker flashes.*

→ There is not enough water in the water tank. u Fill the water tank.

→ If the LED flashes and the water tank is full, the IceMaker is defective.

u Contact the customer service. (see Maintenance).

The temperature is not cold enough.

→ The door of the appliance is not properly closed. u Close the door of the appliance.

→ Insufficient ventilation.

uClear ventilation grilles.

→The ambient temperature is too high. u Solution: (see 1.2) .

→The appliance was opened too frequently or for too long.

u	Wait until the appliance reaches the required temperature
	itself. If not, contact the customer service. (see Mainte-
	nance).
→ Too much fresh food was placed inside without SuperFrost.
u Solution: (see 5.4.4)

→	The appliance is too close to a heat source.
u Solution: (see Putting into operation).
The interior light is not on.
→	The appliance is not switched on.
u	Switch on the appliance.
→	The door was open longer than 15 min.
u	The interior light automatically switches off if the door has
→	been open for about 15 min.
→	If the interior light is not on but the temperature display is lit,
	the bulb is faulty.

u Change the bulb. (see Maintenance).

8 Decommissioning

8.1 Switching off the appliance

Note

u To switch on the entire appliance it is necessary only to switch off the freezer compartment. In so doing, the refrigerator compartment is automatically switched off as well.

8.1.1 Switching off the freezer compartment

uPress ON/OFF button, freezer compartment Fig. 3 (9) for at least 3 seconds.

The temperature displays are dark. The entire appliance is

switched off.w

8.1.2Switching off the refrigerator compart-

ment

uPress ON/OFF button, refrigerator compartment Fig. 3 (1) for at least 3 seconds.

The interior light is off.

The temperature display of the refrigerator compartment is

dark.ww

Note

u If only the refrigerator compartment is to be switched off, e.g during holidays, then always pay attention: the freezer compartment temperature display has to shine.

8.2 Taking the appliance out of service

uEmpty the appliance.

uPut the IceMaker in the cleaning position (see Mainte- nance).

uPull out the power plug.

uClean the appliance (see 6.2) .

uLeave the door open to prevent odour.

9 Disposing of the appliance

The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.

u Disable the appliance. u Pull out the plug.

u Cut through the connecting cable.

7084376 - 03 specifications

The Liebherr 7084376 - 03 is a cutting-edge component designed to enhance the performance and efficiency of Liebherr's extensive range of machinery. Known for its commitment to innovation, Liebherr integrates advanced features and technologies into its products, making the 7084376 - 03 a notable example of this endeavor.

One of the primary features of the Liebherr 7084376 - 03 is its robust construction, ensuring durability and reliability even in the most demanding working conditions. The material selection is paramount, with high-grade alloys used to withstand wear and tear, ensuring a long service life. This durability translates to reduced maintenance costs and increased uptime for users.

The 7084376 - 03 is equipped with state-of-the-art technologies that enhance its operational capabilities. One such technology is the advanced hydraulic system designed to optimize fluid dynamics. This system not only improves the efficiency of power transmission but also facilitates smoother operation, which is vital in handling heavy loads. Additionally, the hydraulic system is engineered to minimize energy consumption, making the machinery more eco-friendly.

Another significant characteristic of the Liebherr 7084376 - 03 is its innovative control interface. The user-friendly design allows operators to easily navigate through various settings and functionalities, promoting efficient use and quick adjustments as required. The interface is designed with intuitive visuals, ensuring that operators can focus on their tasks without getting bogged down by complex controls.

Moreover, the Liebherr 7084376 - 03 features advanced safety mechanisms. These include overload protection and automated alerts, which help prevent accidents and equipment failure. Safety is a crucial aspect of Liebherr’s design philosophy, and these features are a testament to their commitment to providing safe working environments.

In conclusion, the Liebherr 7084376 - 03 stands as a prime example of Liebherr's dedication to producing high-quality, innovative machinery components. Its robust construction, advanced hydraulic technologies, user-friendly control interface, and comprehensive safety features all contribute to its reputation as a reliable choice for operators. Whether in construction, mining, or other heavy-duty applications, the 7084376 - 03 is engineered to perform, ensuring efficiency and safety in challenging environments. As Liebherr continues to push technological boundaries, components like the Liebherr 7084376 - 03 are essential for achieving peak operational excellence.