Liebherr CS 1611 7801 149-00 manual Temperature Display Figure, Ventilation Figure

Page 9

Operation

Temperature Display - Figure 4

In normal operation, the following settings will be displayed:

•the average refrigerator temperature

•the warmest frozen food temperature.

When starting up for the first time or when the appliance is warm, dashes will appear in the freezer temperature display, until the temperature in the freezer compartment is 32°F (0°C).

The display will flash:

•if you change the temperature or

•if the temperature rises by several degrees, indi- cating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer.

•If “F1” to “F5” appears in the display, the appli- ance has a fault. Have the fault number available when you contact the customer service depart- ment.

Ventilation - Figure 4

The ventilation switch is used for re-circulated cool air:

You can use the switch as required to:

•chill large quantities of fresh food fast.

•keep the temperature evenly distributed through- out the entire refrigerator compartment. The air will circulate more intensively, keeping all the different areas in the compartment at the same temperature and ensuring all the food inside is chilled at the same temperature.

We recommended you use the ventilation fan if:

•room temperatures are too high (approximately 95°F [35°C] or higher).

•the air humidity is high, during high heat and humidity.

Turning on: Touch the Ventilation icon briefly so the LED turns on.

Turning off: Touch the Ventilation icon again until the LED  turns off.

Audible alarm signal - Figure 4

The audible alarm signal helps to protect frozen food and to save energy.

The audible alarm signal is switched off by touching the alarm icon.

Audible door alarm

This sounds when the door has been left open for longer than about 180 seconds. The sound switch- off function is active as long as the door is left open. The alarm automatically switches back to standby when the door is shut.

Audible/visual temperature alarm

It always sounds if the freezer temperature is not low enough. The temperature display and the alarm LED flashes at the same time.

This can be caused by:

-warm, fresh food being placed in the freezer;

-too much warm air from the outside entering when re-arranging or removing frozen food,

-a fault in the appliance.

The temperature display will continue to flash until the cause of the alarm has been rectified. It will then stop flashing and light up continually. The audible warning signal is now automatically reset.

Power Failure/Frost-Control

Display - Figure 4

If the power failure LED is lit, this means the freezer temperature has risen too high during the last few hours or days due to a power failure. The freezer temperature display flashes at the same time.

•If you touch the Alarm icon now, the highest temperature registered during the power failure will be displayed.

•Check the quality of the food in case it has become too warm or even defrosted.

•The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear.

The display can be turned off by touching the Alarm icon again.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Use and Care Manual Table of Contents Electrical Safety SafetyPlease read and follow these instructions Disposal of Old ApplianceImportant Safety Information Disposal of Carton Safety RegulationsDescription of appliance and equipment Figure FeaturesDescription of refrigerator Description of freezerOperating and Control Elements , Figure Temperature and control displayAppliance Freezer Operating iconsTo reduce the temperature Setting the Temperature FigureTo increase the temperature OperationAudible alarm signal Figure Temperature Display FigurePower Failure/Frost-Control Ventilation FigureHow to activate the setup mode Setup Mode FigureExit setup mode Supercool FigureHow to activate the Sabbath Mode = Sabbath ModeHow to deactivate the Sabbath Mode = Display brightness How to adjust the display brightnessHow to change the temperature display to degrees Celsius = Temperature display modeHow to activate the child lock How to deactivate the child lockArranging Food Figure Equipment Refrigerator CompartmentRepositioning the door racks Figure Vario Box FigureRepositioning the shelves Figure To install the vegetable drawerIf you need space for large bottles and con- tainers Removing the shelves FigureFreezing Interior LightInformation System Figure Refrigerator Compartment Freezer CompartmentFreezer Compartment Freezing with Superfrost FigureFreezing and Storage Cleaning CleaningProblem Possible Cause and Remedy TroubleshootingDefrosting/Vacation Customer Service FigureAppliance Information DefrostingLIEBHERR WARRANTY PLAN Warranty

CS 1611 7801 149-00 specifications

The Liebherr CS 1611 7801 149-00 is a versatile and highly efficient construction site mixer known for its reliability and advanced technology. As part of Liebherr's extensive lineup, this model caters to the needs of modern construction projects, delivering superior mixing performance and user-centric features.

One of the standout features of the CS 1611 is its robust construction. This mixer is built with high-strength materials, ensuring durability even under the toughest working conditions. The reinforced design minimizes wear and tear, translating into lower maintenance costs and increased lifespan.

With a mixing capacity that is optimized for a variety of applications, the CS 1611 is suitable for both small-scale and large-scale projects. It can handle a wide range of materials, from concrete to aggregates, making it a versatile choice for contractors and construction firms.

In terms of technology, the Liebherr CS 1611 incorporates cutting-edge mixing mechanisms that ensure a homogenous blend. The mixer’s specially designed mixing arms and paddles allow for efficient material distribution, reducing the time needed to achieve the desired consistency. This technology not only enhances productivity but also ensures high-quality results.

The CS 1611 also boasts an intuitive control system, which allows operators to easily manage mixing speeds and cycles. This user-friendly interface is designed to enhance operational efficiency, making it accessible for operators of all skill levels. Additionally, the mixer is equipped with safety features that ensure secure operation, protecting both the operator and the machinery.

Mobility is another key characteristic of the Liebherr CS 1611. It features a compact design that enables easy transportation between job sites. The mixer can be easily mounted on various vehicle types, providing contractors with flexibility and convenience.

Energy efficiency is paramount in today’s construction industry, and the Liebherr CS 1611 responds to this demand. It is designed to minimize energy consumption while maintaining optimal performance levels. This aligns with current sustainability trends, as it helps reduce the environmental impact of construction activities.

In conclusion, the Liebherr CS 1611 7801 149-00 mixer stands out for its robust construction, advanced mixing technology, user-friendly controls, and energy efficiency. These features combined make it an essential tool for a wide range of construction projects, meeting the evolving demands of the industry while ensuring high-quality performance and reliability.
Top Page Image Contents