Liebherr CS 1611 7801 149-00 manual Repositioning the shelves Figure, Removing the shelves Figure

Page 14

Refrigerator Compartment

Repositioning the shelves - Figure 11

1.Hold the shelf underneath with your hand to avoid from tipping down backwards when removing.

2.Lift the shelf at the front.

3.Remove the shelf forward until the circular cutout of the shelf is in line with the interior light cover.

4.Lift the shelf up or down and replace in the desired position.

Interior lightcover

Figure 11

If you need space for large bottles and con- tainers.

Place the shelf rails provided on the sup- ports on the left and right at the desired height - Figure 13.

Insert the glass shelves

 

as shown in fig. 18.

 

The glass shelf with the

Figure 13

raised edge must go at

 

the back.

 

If you need to make

 

space for tall contain-

 

ers, simply slide the

 

front half of the sec-

 

tioned glass shelf care-

 

fully underneath the

 

back half - Figure 14.

Figure 14

Removing the shelves - Figure 12

1.Follow the first three steps in the chapter above.

2.Lift the shelf down and stop just over the upper vegetable bin.

3.Move the front of the shelf upwards until the shelf is in a vertical position.

4.Turn the shelf counterclockwise and remove.

To avoid from falling down, always hold the shelf with both hands when removing.

Figure 12

To remove the vegetable drawer

Pull the drawer straight out, grip at the back and lift out - Figure 15.

To install the vegetable drawer

Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Figure 15

14

Image 14
Contents Use and Care Manual Table of Contents Please read and follow these instructions SafetyElectrical Safety Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonDescription of refrigerator FeaturesDescription of appliance and equipment Figure Description of freezerAppliance Temperature and control displayOperating and Control Elements , Figure Freezer Operating iconsTo increase the temperature Setting the Temperature FigureTo reduce the temperature OperationPower Failure/Frost-Control Temperature Display FigureAudible alarm signal Figure Ventilation FigureExit setup mode Setup Mode FigureHow to activate the setup mode Supercool FigureHow to deactivate the Sabbath Mode = Sabbath ModeHow to activate the Sabbath Mode = Display brightness How to adjust the display brightnessHow to activate the child lock = Temperature display modeHow to change the temperature display to degrees Celsius How to deactivate the child lockRepositioning the door racks Figure Refrigerator CompartmentArranging Food Figure Equipment Vario Box FigureIf you need space for large bottles and con- tainers To install the vegetable drawerRepositioning the shelves Figure Removing the shelves FigureInformation System Figure Interior LightFreezing Refrigerator Compartment Freezer CompartmentFreezing and Storage Freezer CompartmentFreezing with Superfrost Figure Cleaning CleaningTroubleshooting Problem Possible Cause and RemedyAppliance Information Customer Service FigureDefrosting/Vacation DefrostingWarranty LIEBHERR WARRANTY PLAN

CS 1611 7801 149-00 specifications

The Liebherr CS 1611 7801 149-00 is a versatile and highly efficient construction site mixer known for its reliability and advanced technology. As part of Liebherr's extensive lineup, this model caters to the needs of modern construction projects, delivering superior mixing performance and user-centric features.

One of the standout features of the CS 1611 is its robust construction. This mixer is built with high-strength materials, ensuring durability even under the toughest working conditions. The reinforced design minimizes wear and tear, translating into lower maintenance costs and increased lifespan.

With a mixing capacity that is optimized for a variety of applications, the CS 1611 is suitable for both small-scale and large-scale projects. It can handle a wide range of materials, from concrete to aggregates, making it a versatile choice for contractors and construction firms.

In terms of technology, the Liebherr CS 1611 incorporates cutting-edge mixing mechanisms that ensure a homogenous blend. The mixer’s specially designed mixing arms and paddles allow for efficient material distribution, reducing the time needed to achieve the desired consistency. This technology not only enhances productivity but also ensures high-quality results.

The CS 1611 also boasts an intuitive control system, which allows operators to easily manage mixing speeds and cycles. This user-friendly interface is designed to enhance operational efficiency, making it accessible for operators of all skill levels. Additionally, the mixer is equipped with safety features that ensure secure operation, protecting both the operator and the machinery.

Mobility is another key characteristic of the Liebherr CS 1611. It features a compact design that enables easy transportation between job sites. The mixer can be easily mounted on various vehicle types, providing contractors with flexibility and convenience.

Energy efficiency is paramount in today’s construction industry, and the Liebherr CS 1611 responds to this demand. It is designed to minimize energy consumption while maintaining optimal performance levels. This aligns with current sustainability trends, as it helps reduce the environmental impact of construction activities.

In conclusion, the Liebherr CS 1611 7801 149-00 mixer stands out for its robust construction, advanced mixing technology, user-friendly controls, and energy efficiency. These features combined make it an essential tool for a wide range of construction projects, meeting the evolving demands of the industry while ensuring high-quality performance and reliability.