Liebherr Guide on How to Clean Your Refrigerator and Reset Its Features
Page 12

Defrosting

Refrigerator compartment

The refrigerator compartment defrosts automatically.The water that forms on the rear wall drains into a reservoir at the back of the ap- pliance and evaporates automatically through the compressor heat.

Freezer compartment

The NoFrost system automatically defrosts the appliance.

Any moisture arising collects on the evaporator and freezes, and is periodically defrosted and evaporated.

Cleaning

Before cleaning always switch off the appliance. Pull out the mains plug or switch off or unscrew the fuse.

Clean the inside, equipment and outer walls with lukewarm water and a little detergent. Do not use abrasive or acid cleaners or chemical solvents.

Do not use steam cleaners because of the risk of injury and damage.

•Ensure that no cleaning water penetrates into the electrical com- ponents or ventilation grille.

•Dry all parts well with a cloth.

•Do not damage or remove the type plate on the inside of the ap- pliance. It is very important for servicing purposes.

•Use a commercially available stainless-steel cleaning agent for stainless-steel appliances.

-In order to achieve best possible protection, apply a stainless-steel care agent uniformly in grinding direction after cleaning. Points which are darker at the start and a more intensive coloration of the stainless-steel surface are normal.

-Do not use abrasive sponges or scourers, do not use concentrated cleaning agents and never use cleaning agents containing sand, chloride or acid or chemical solvents, as these would damage the surfaces and could cause corrosion.

Cleaning the dust filter

1.Disconnect the appliance from the mains.

2.Pull the bottom freezer drawer right out.

3. Unscrew the ventilation grille.

4. Push down the button on the filter, tilt the filter forwards and remove.

The dust filter can be washed in a dish- washer or by hand using water and detergent.

5.Dry the filter and then, in reverse order, replace it.

6.Re-attach the ventilation grille.

7.Cancel the dust filter LED in the display. See Setup mode, = Confirm dust filter cleaning.

24

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 7082 No-frost combined refrigerator-freezerSafety instructions and warnings Climate rating Ambient temperatureDisposal notes Range of appliance useTemperature and control display IconsRefrigerator operating icons Appliance control iconsInstalling the water filter Water filterSaving energy Removing the water filterSwitching the appliance on and off Setting the temperatureTemperature display Audible warning signalSetup mode = Confirm water filter change= Ice maker vacation state = Child lock= Display brightness = Door gasket heating controlInterior light EquipmentBioFresh compartment Humidity selectionDry HumidIce maker Safety instructions and warnings Freezer compartment descriptionFreezing Freezing with SuperFrostSwitching the ice maker on Switching the ice maker offBleeding the ice maker Ice maker vacation stateCleaning Cleaning the dust filterDefrosting Refrigerator compartmentTemperature is not cold enough MalfunctionsShutting your appliance down Loud running noise

7082-499-00 specifications

The Liebherr 7082-499-00 is an advanced, innovative product from Liebherr, a global leader in construction machinery and equipment manufacturing. This exceptional model combines cutting-edge technology with robust engineering to provide unmatched efficiency and reliability in various applications.

One of the standout features of the Liebherr 7082-499-00 is its powerful hydraulic system, which enhances performance substantially. This hydraulic technology ensures smooth and precise operations, making it ideal for heavy lifting tasks and complex excavations. The model boasts an impressive lifting capacity, which enables it to handle demanding workloads with ease. Its hydraulic components are designed for durability, ensuring a longer service life and reduced need for maintenance.

The Liebherr 7082-499-00 is equipped with a highly efficient engine that not only delivers high power output but also meets strict emissions regulations. This commitment to sustainability aligns with global trends towards greener construction practices. The engine's fuel efficiency translates into lower operational costs, making the Liebherr 7082-499-00 an economical choice for contractors and construction companies.

Technology is at the forefront of the Liebherr 7082-499-00's design. The model features an integrated control system that optimizes performance based on real-time data. This smart technology allows operators to monitor load weights, boom angles, and operational limits, thereby enhancing safety and productivity on the job site. Enhanced ergonomics are also a focus, with operator-friendly controls and spacious cabins that improve comfort and reduce fatigue during long working hours.

Another key characteristic is its versatility. The Liebherr 7082-499-00 can be adapted for various tasks, whether it involves excavating, lifting, or loading materials. It is compatible with a range of attachments, allowing operators to customize their equipment for specific projects, thereby increasing operational flexibility.

Additionally, the Liebherr 7082-499-00 is designed with robust construction and high-quality materials, ensuring resilience under tough working conditions. This durability minimizes downtime caused by repairs or mechanical failures, contributing to overall productivity.

In conclusion, the Liebherr 7082-499-00 stands out as a powerful, efficient, and versatile machine in the construction sector. Combining advanced hydraulic technology, a strong and sustainable engine, intelligent control systems, and adaptability, it represents Liebherr's commitment to innovation and excellence. Whether for small-scale projects or large construction operations, the Liebherr 7082-499-00 is designed to meet the rigorous demands of the industry.
Top Page Image Contents