Liebherr CS 1640 7082 481-01 Making Ice Cubes, Filling the Water Tank, To Start the Ice Maker

Page 18

Ice Maker

Making Ice Cubes

The ice maker is in the top left drawer in the freezer compartment of the combined refrigerator- freezer. You can identify this drawer by its labeling IceMaker (Figure 20).

Figure 20

Filling the Water Tank

The water for the ice maker is supplied from a water tank in the refrigerator compartment (see "Description of Appliance and Equipment" - page 6). This must be filled with water before the ice maker is switched on.

1. Pull out the water tank up to the last clip-in position. This makes filling the tank in the appliance easy - Figure 21.

2. Open the front flap and fill

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the water tank while still in

 

 

 

Figure 21

 

 

 

the appliance with water

 

 

using a jug or bottle - Figure 21.

 

 

The water tank can also be removed completely to be filled with water.

3. Reinsert the water

 

tank and slide into

 

the holder as far as it

Figure 22

will go - Figure 22.

IMPORTANT

If the water tank has not been slid right to the back, no ice cubes will be produced.

To Start the Ice Maker

To turn the ice maker on

•Pull out the drawer.

•Press the On/Off button so the Ice Maker LED comes on (Figure 23).

• Close the drawer.

After you start the ice

 

maker for the first time it

 

may take up to 24 hours

Figure 23

before the first ice cubes

 

are ready.

 

Note

The first three batches of ice must not be con- sumed or used.

The production capacity is 90 - 100 ice cubes in

24 hours at a temperature of 0°F inside the freezer compartment.

To have the maximum capacity of approx. 140 ice cubes in 24 hours, activate the SuperFrost function.

Be aware that this increases the energy con- sumption because the compressor will run con- stantly.

The ice cubes fall out of the ice maker into the drawer. When the ice reaches a certain level in the drawer, the appliance stops producing ice automati- cally. The ice maker will not fill the drawer to the top.

If you need a large quantity of ice you can change out the drawer to the right with the complete IceMaker drawer.

To turn the ice maker off

If you do not need any ice cubes, the ice maker can be turned off independently of the freezer com- partment.

•Press the On/Off button for approximately 1 second so the control lamp goes out.

Note

If the ice maker is turned off, the empty draw- er can also be used to freeze and store food.

Top up water tank LED - Figure 25

The LED lights up when the water tank needs topping up.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Use and Care Manual Table of Contents Please read and follow these instructions SafetyElectrical Safety Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonDescription of refrigerator FeaturesDescription of Appliance and Equipment Figure Description of freezerTemperature and control display Operating and Control Elements , FigureTo increase the temperature Setting the Temperature FigureTo reduce the temperature OperationPower Failure/FrostControl Temperature Display FigureAudible Alarm Signal Figure Ventilation FigureExit setup mode Setup Mode FigureHow to activate the setup mode SuperCool FigureHow to deactivate the Sabbath mode = Sabbath modeHow to activate the Sabbath mode = Display brightness How to adjust the display brightnessHow to deactivate the child lock How to adjust the water quantityHow to activate the child lock = Water quantity for Ice cube trayRepositioning the door racks Figure Refrigerator CompartmentArranging Food Figure Equipment Vario Box FigureIf you need space for large bottles and con- tainers To install the vegetable drawerRepositioning the shelves Figure Removing the shelves FigureInterior Light Bulb dataReplacing the bulb Freezer Compartment Freezing Freezing with SuperFrost FigureInformation System Figure Ice Maker Freezing and StorageMaking Ice Cubes Filling the Water TankTo Start the Ice Maker How to activate the Ice Maker Vacation State Ice Maker at VacationsCleaning CleaningDefrosting/Vacation DefrostingVacation Tips Troubleshooting Problem Possible Cause and RemedyService Number 2 and Appliance / Serial Number Ice Maker TroubleshootingCustomer Service Figure Appliance InformationWarranty LIEBHERR WARRANTY PLAN

CS 1640 7082 481-01 specifications

The Liebherr CS 1640 7082 481-01 is a highly advanced crawler crane designed for versatile applications in the construction and heavy lifting sectors. Known for its robust build quality and innovative features, this crane provides exceptional performance and efficiency on job sites.

One of the standout features of the Liebherr CS 1640 is its impressive lifting capacity. With a maximum lifting capacity of 1640 tonnes, this crane is engineered to handle even the most demanding lifting tasks. It combines a powerful hoisting system with a sophisticated winch to ensure reliable performance.

The crane's main boom has a variable length, allowing operators to customize it according to their lifting needs. The boom can be extended or retracted easily, enabling flexible operation in confined spaces or at great heights. This adaptability is further enhanced by the ability to fit different attachments, such as jibs and extensions, tailored to specific project requirements.

The CS 1640 features Liebherr's advanced Luffing technology. This system enables precise control of the boom angle, allowing for smooth and efficient positioning of loads. Coupled with a state-of-the-art hydraulic drive system, the crane's operation is seamless, minimizing downtime and maximizing productivity.

Technological innovation is at the forefront of the CS 1640's design. The crane is equipped with an intuitive digital control system that provides operators with real-time data on load weight, boom angle, and operational status. This system not only enhances safety but also improves decision-making on the job site.

Safety remains a top priority with the Liebherr CS 1640. The crane is designed with multiple safety features, including overload protection, emergency stop systems, and advanced monitoring capabilities. These features work together to ensure the safety of both operators and crew members in challenging working environments.

In terms of mobility, the crawler configuration allows the CS 1640 to traverse rough terrain with ease. This makes it an ideal choice for construction sites that may have uneven ground or limited access. Its efficient fuel consumption also adds to its appeal, making it a cost-effective option for long-term projects.

In summary, the Liebherr CS 1640 7082 481-01 is a powerhouse in the crane industry, offering robust lifting capabilities, advanced technologies, and a focus on safety and efficiency. Its versatility and reliability make it a preferred choice for construction and heavy-lifting professionals worldwide.
Top Page Image Contents