Liebherr CS 1640 7082 481-01 manual Repositioning the shelves Figure, Removing the shelves Figure

Page 14

Refrigerator Compartment

Repositioning the shelves - Figure 10

1.Hold the shelf underneath with your hand to avoid from tipping down backwards when removing.

2.Lift the shelf at the front.

3.Remove the shelf forward until the circular cutout of the shelf is in line with the front supports.

4.Lift the shelf up or down and replace in the desired position.

Front supports

Figure 10

If you need space for large bottles and con- tainers.

Place the shelf rails provided on the sup- ports on the left and right at the desired height - Figure 12.

Insert the glass shelves

 

as shown in fig. 13.

 

The glass shelf with the

Figure 12

raised edge must go at

 

the back.

 

If you need to make

 

space for tall contain-

 

ers, simply slide the

 

front half of the sec-

 

tioned glass shelf care-

 

fully underneath the

 

back half - Figure 13.

Figure 13

Removing the shelves - Figure 11

1.Follow the first three steps in the chapter above.

2.Lift the shelf down and stop just over the upper vegetable bin.

3.Move the front of the shelf upwards until the shelf is in a vertical position.

4.Turn the shelf counterclockwise and remove.

To avoid it falling down, always hold the shelf with both hands when removing.

Figure 11

To remove the vegetable drawer

Pull the drawer straight out, grip at the back and lift out - Figure 14.

To install the vegetable drawer

Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Figure 14

14

Image 14
Contents Use and Care Manual Table of Contents Please read and follow these instructions SafetyElectrical Safety Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonDescription of refrigerator FeaturesDescription of Appliance and Equipment Figure Description of freezerTemperature and control display Operating and Control Elements , FigureTo increase the temperature Setting the Temperature FigureTo reduce the temperature OperationPower Failure/FrostControl Temperature Display FigureAudible Alarm Signal Figure Ventilation FigureExit setup mode Setup Mode FigureHow to activate the setup mode SuperCool FigureHow to deactivate the Sabbath mode = Sabbath modeHow to activate the Sabbath mode = Display brightness How to adjust the display brightnessHow to deactivate the child lock How to adjust the water quantityHow to activate the child lock = Water quantity for Ice cube trayRepositioning the door racks Figure Refrigerator CompartmentArranging Food Figure Equipment Vario Box FigureIf you need space for large bottles and con- tainers To install the vegetable drawerRepositioning the shelves Figure Removing the shelves FigureReplacing the bulb Interior LightBulb data Information System Figure Freezer CompartmentFreezing Freezing with SuperFrost Figure Ice Maker Freezing and StorageTo Start the Ice Maker Making Ice CubesFilling the Water Tank How to activate the Ice Maker Vacation State Ice Maker at VacationsCleaning CleaningVacation Tips Defrosting/VacationDefrosting Troubleshooting Problem Possible Cause and RemedyService Number 2 and Appliance / Serial Number Ice Maker TroubleshootingCustomer Service Figure Appliance InformationWarranty LIEBHERR WARRANTY PLAN

CS 1640 7082 481-01 specifications

The Liebherr CS 1640 7082 481-01 is a highly advanced crawler crane designed for versatile applications in the construction and heavy lifting sectors. Known for its robust build quality and innovative features, this crane provides exceptional performance and efficiency on job sites.

One of the standout features of the Liebherr CS 1640 is its impressive lifting capacity. With a maximum lifting capacity of 1640 tonnes, this crane is engineered to handle even the most demanding lifting tasks. It combines a powerful hoisting system with a sophisticated winch to ensure reliable performance.

The crane's main boom has a variable length, allowing operators to customize it according to their lifting needs. The boom can be extended or retracted easily, enabling flexible operation in confined spaces or at great heights. This adaptability is further enhanced by the ability to fit different attachments, such as jibs and extensions, tailored to specific project requirements.

The CS 1640 features Liebherr's advanced Luffing technology. This system enables precise control of the boom angle, allowing for smooth and efficient positioning of loads. Coupled with a state-of-the-art hydraulic drive system, the crane's operation is seamless, minimizing downtime and maximizing productivity.

Technological innovation is at the forefront of the CS 1640's design. The crane is equipped with an intuitive digital control system that provides operators with real-time data on load weight, boom angle, and operational status. This system not only enhances safety but also improves decision-making on the job site.

Safety remains a top priority with the Liebherr CS 1640. The crane is designed with multiple safety features, including overload protection, emergency stop systems, and advanced monitoring capabilities. These features work together to ensure the safety of both operators and crew members in challenging working environments.

In terms of mobility, the crawler configuration allows the CS 1640 to traverse rough terrain with ease. This makes it an ideal choice for construction sites that may have uneven ground or limited access. Its efficient fuel consumption also adds to its appeal, making it a cost-effective option for long-term projects.

In summary, the Liebherr CS 1640 7082 481-01 is a powerhouse in the crane industry, offering robust lifting capabilities, advanced technologies, and a focus on safety and efficiency. Its versatility and reliability make it a preferred choice for construction and heavy-lifting professionals worldwide.