OPERATION
You can change the settings in increments by briefly pressing the buttons again. If the buttons are held down, the temperature setting will change faster. Approximately five seconds after the button has been released, the display will automatically show the actual freezing or BioFresh temperature (known as the “actual setting”).
The altered temperature will adjust slowly to the new value.
Additional Features
In
To activate the
•Press SuperFrost button for approximately five seconds, the SuperFrost will button will flash and
the display shows 
for Childproof Lock.
Note
The value to be altered will flash.
•Select the required function by pressing the ?/? (UP/DOWN) button:
= childproof lock or 
= brightness or
=unit of temperature.
•Now select/acknowledge function by pressing the SuperFrost button briefly:
–For 
= childproof lock, press the
/ (UP/DOWN) button to select
= childproof lock ON or 
= childproof lock OFF and acknowledge with the SuperFrost button. When the symbol (6) is lit, the childproof lock is activated.
–For 
= brightness, press /
(UP/DOWN) select 
= minimum to
= maximum brightness and acknowledge with the SuperFrost button.
–For 
= unit of temperature, press the / (UP/DOWN) button to select °C = degrees Celsius or °F = degrees Fahrenheit for temperature display and acknowledge with the SuperFrost button.
To exit set-up mode:
•Press the ON/OFF button; after two minutes the electronic system automatically switches over and the normal operating mode is activated.
Temperature Display
When the appliance is switched on (Fig. 1, 3), the set unit of temperature °F or °C appears on the display (Fig. 1, 7) for a few seconds.
If you wish to change the unit of temperature, you can adapt the display.
Refer to Additional Functions, unit of temperature for more information.
In normal operation, the following settings will be displayed:
–the average BioFresh temperature in display (Fig. 1, 7) and
–the warmest frozen food temperature in display (Fig. 1, 1).
The display will flash:
–if you change the temperature or
–if the temperature rises by several degrees, indicating a rise in temperature from placing fresh, "warm" food in the freezer or if you remove or
Once you have finished loading or
•If F 0 to F 5 appears in the display, the appliance has recognized a fault. Contact your Liebherr retailer or the customer service department and indicate the fault number displayed; this will tell the technician what kind of irregularity has occurred.
Audible Warning Signal - Figure 1
The audible warning signal helps to protect frozen food and to save energy.
The audible warning device is turned off by pressing the audible warning ON/OFF button (Fig. 1, 5).
The alarm will turn off automatically as soon as the temperature is low enough or the door is closed.
* Depending on model and options
6 | BFI/BF1055 (7082 |