BIOFRESH COMPARTMENT
Drawers - Figure 5
Figure 5
Replacing the bulb:
!WARNING
To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.
To remove the drawers:
Pull the drawer straight out, grip at the back and lift out.
To install the drawers:
Place the drawer on the rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.
Interior Light - Figure 5
This turns OFF automatically after the door has been opened for approximately 15 minutes. If it does not turn ON when the door is opened briefly, but the temperature display is working, the bulb(s) may be defective.
Bulb data:
120 V, Maximum wattage - 25 W Bulb fitting - E14
Current and voltage must agree with details on the model plate.
!CAUTION
To prevent possible injury due to broken glass, use hand protection when replacing the interior light bulb(s).
Figure 6
•Press the light cover together at the sides (1), lift out and unclip (2).
•Replace the bulb.
•Clip the back end of the cover in and clip the sides into place.
* Depending on model and options
BFI/BF1055 (7082 | 11 |