Rangemaster U110121 - 01A manual Reversing the Doors, Tools required, Procedure

reversing the Doors

The doors of your fridge-freezer can be set to open from the left or the right. If you want the door to hinge on the left- hand side and open from the right-hand side, then follow the proecedure below.

This procedure MUST be completed before the

nn

furniture door is attached.

When reversing a door, keep any parts that you remove from the appliance for later use.

Take care when unscrewing any of the hinges: hold

nn

the door to stop it from falling and causing damage.

Tools required:

•Phillips screwdriver

•Flat bladed screwdriver

•Pliers

Procedure

1.Undo the screws in the top of the upper support bracket and remove. Slide the support bracket forwards and remove (Fig.4-2).

2.Using a suitable flat bladed screwdriver, carefully lever off the hinge cover cap (Fig.4-3).

3.Undo the upper hinge fixing screws and remove the hinge (Fig.4-4).

4.Remove the fridge door by lifting it up and away from the middle hinge. To stop the door from being damaged, place it on a cushioned surface.

5.Undo the middle hinge fixing screws and remove the hinge (Fig.4-5).

6.Remove the freezer door by lifting it up and away from the lower hinge. To stop the door from being damaged, place it on a cushioned surface.

7.Undo the lower door hinge screws and remove the hinge (Fig.4-6). Remove the pin from the hinge and fit it into the left-hand hole (Fig.4-7). Refit the lower hinge on the left-hand side.

IMPORTANT: The position of the hinge pin MUST be changed from the right hole to the left hole.

8.Using a suitable flat screwdriver, carefully remove the screw cap and remove the screw hole covers (Fig.4-8). Retain the screw cap and screw hole covers for use on the opposite side of the appliance.

9.Refit the freezer door.

10.Refit the middle door hinge onto the left-hand side. Fit the screw cap and screw hole cover to the right-hand middle hinge position.

11.Take the upper hinge and remove the pin. Fit the pin to the new left-hand hinge: this is in the fixing kit (Fig.4-9).

12.Refit the refrigerator door and install the new door hinge bracket (Fig.4-10).

13.Refit the upper support bracket.

Fig.4-3

Fig.4-5

Fig.4-7

Fig.4-9

Right-hand Left-hand

hingehinge

Re-use the hinge pin

Fig.4-2

Fig.4-4

Fig.4-6

Fig.4-8

Fig.4-10

11