Electrical Connections, Hob Check, Customer Care

INSTALLATION

Check the appliance is electrically safe you have ﬁnished.

Electrical Connections

This appliance must be installed by a qualiﬁed electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requirements.

WARNING: THIS APPLIANCE MUST BE EARTHED

Note: All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings. Connection to the electrical supply can be made with either a plug and socket, or be permanently wired via a double pole switch. The hob is supplied with a 3-core cable, 2m long.

If a replacement cable is ﬁtted it must be 250V high temperature PVC (85°C), 1mm² minimum conductor size.

Connect the hob up as shown (Fig.5-5).

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Green and yellow:	Earth
Blue:	Neutral
Brown:	Live

Hob Check

Check each cooking zone in turn.

	Fig.5-4
	��
��
	��
��
��	��
	��
	��
��
	��

��

Fig.5-5

Customer Care

Please complete your contact details in the front of this section. Please inform the user how to operate the hob and hand over the instruction pack.

ArtNo.317-0017 Connection box

Thank you.

L N E