3. Looking after your Dishwasher | |
|
Low salt indicator
Low rinse aid indicator
ArtNo.800- | the filter 2 |
Care
After Every Wash
After every wash, set the
Before cleaning or performing maintenance isolate
nn
from mains.
Overall condition of appliance
Check that no grease or scale has accumulated on the inside of the dishwasher. If you discover any deposits: Clean the interior of the dishwasher thoroughly with a detergent solution.
Dishwasher salt
Check the LOW SALT indicator. Top up with salt, if required
Rinse-aid
Check the LOW RINSE AID indicator
Filters
The filters prevent larger particles of food in the water from reaching the pump. These particles may occasionally block the filters.
When the appliance has finished washing, check the filters for particles of food and, if required, clean.
After undoing the coarse
Insert the filter unit and tighten the coarse
Spray arms
Limescale and remnants of food in the washing water can block the nozzles in the spray arms and the arm mountings.
Inspect the nozzles in the spray arms for blocked holes due to remnants of food.
If necessary, pull the lower arm
Clean both spray arms under running water.
Refit the spray arms. Make sure that the lower arm
nn
has locked into place and the upper one is screwed tight.
Solvents or Abrasive Cleaning Products
DO NOT use solvents or abrasive cleaning products to clean the exterior and rubber parts of the dishwasher. Rather, use only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar or a cleaning product made specifically for dishwashers.
12