Washing Dishes
Programme overview
Time delay
Press for additional options (scroll through):
Upper rack wash function
Lower rack wash function
Combi detergent tablets function
Program select
Start/reset button
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in Table
The corresponding programme sequence, duration and consumption details are shown in the right half of the table.
Example: Use the normal programme for dishes and utensils that are heavily soiled.
Earn savings
If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary considerably according to:
•Different amounts of dishes
•Temperature of mains water supply
•Pressure of mains water supply
•Ambient temperature
•Fluctuations in mains voltage
•
Switching the dishwasher ON
1.Turn on the tap.
2.Open the door.
3.Set
4.Press the programme button ‘P’; the programme indicator will light
5.Press the Start/Reset button
6.Close the door and the dishwasher will start automatically.
End of programme
Six beeps will indicate that the wash cycle has finished and all the programme indicators light.
| |
On/O button |
Programme button
Programme indicator
Start/reset button
7