Rangemaster RDW6012FI/SF manual Installation, Positioning the Dishwasher, Cold Water Connection

Page 18

5. Installation

DocNo.800-0501 - Installation - RDW6012 dishwasher

Fig.5-1

600-700 mm

80 mm

Fig.5-2

 

¾“ BSP tap connector

 

 

 

Water hose

ArtNo.800-0101 - Cold water connection

Washer

Fig.5-3

100cm

40cm ArtNo.800-0103 - RDW6012 waster hose connection

Fig.5-4

Waste hose support (￿xed to wall)

Waste

hose

To waste

Positioning the Dishwasher

The dishwasher should be aligned to the front of the adjacent cabinets, with allowance made for the door thickness. The dishwasher has water supply and drain hoses that can be positioned on either to the left or the right.

Before installing the dishwasher into a kitchen cabinet, holes must not be drilled into the sides or door, as to avoid compromising the performance and operation of the appliance.

A plastic self-adhesive anti-condensation strip is supplied with the dishwasher. Fix the strip to the underside of the worktop, along the front edge (Fig.5-1).

Connect up the cold water supply, the drain hose and the electrical connections (see below) then slide the dishwasher into the cabinet opening. Make sure the unit sits on the plastic skids supplied.

Cold Water Connection

Connect the water supply hose (supplied loose) to the cold water inlet at the rear. Connect the other end to a ¾“ BSP tap connector (Fig.5-2). Make sure that the washers are in place and that it is fastened securely in place.

IMPORTANT: If the water pipes are new or have not been used for an extended period of time, run the water for

a while to make sure that the water is clear and free of impurities BEFORE connecting to the dishwasher. Failure to carry out this precaution may lead to the water inlet becoming blocked and causing damage the appliance.

Drain Hose Connection

Connect the drain hose the water outlet. Insert the hose into a drainpipe with a minimum diameter of 40 mm, or let it run into a sink, making sure to avoid bending or crimping. If necessary, fit a siphon trap (U-bend) with a connecting piece. The free end of the hose must be at a height of between

40-100 cm and must not be immersed in water (Fig.5-3).

WARNING! The connecting piece for the siphon trap

nn

(U-bend) must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain (Fig.5-4).

16

Image 18
Contents User Guide Contents Before You Start Overview and Operation Getting to Know Your DishwasherDishwasher Interior -1 Control Panel -2 Adjusting salt consumption SaltLoading the salt into the container Loading the rinse aid Rinse AidDetergent Loading the detergentPossible causes What you should not put into the dishwasherDamage to Glassware and Other Dishes Suggested remedyArranging Crockery, Glasses, etc. in the Dishwasher Using the lower rackUsing the upper rack ShelfWashing Dishes Programme Overview Wash ProgrammeUsing 3-in 1 Detergent Tablets Upper rack wash To cancel the ‘tablets’ functionTo select the ‘tablets’ function Lower rack washDelayed start programming Reset drain functionSolvents or Abrasive Cleaning Products CareOverall condition of appliance When You Go on Holiday Moving the ApplianceSeals Problems when the unit is switched on TroubleshootingResolving minor problems yourself Problems with the applianceProblems during washing Problems with the dishes, cutlery, etcCold Water Connection InstallationPositioning the Dishwasher Drain Hose ConnectionCare for the external cable Electrical ConnectionLevelling the Dishwasher Damaged electrical cableFitting the Decor Door Fixing the door panel fittingsMounting the door panel to the dishwasher Adjusting the Door Springs Securing the DishwasherFitting the Plinth General Information Circuit Diagram Code DescriptionConnections Technical DataDimensions RatingsPage Page Page W. ra n g e m a s te r. co. u k

RDW6012FI/SF specifications

The Rangemaster RDW6012FI/SF is a high-performance dual fuel range cooker that stands out in the kitchen appliance market for its blend of traditional design and modern technology. This versatile cooker combines gas cooking with electric ovens, offering the best of both worlds for culinary enthusiasts.

One of the main features of the RDW6012FI/SF is its spacious cooking capacity. The model includes a large main oven and a secondary oven, both equipped with multiple cooking functions. This allows users to prepare multiple dishes simultaneously, making it perfect for family meals or entertaining guests. The main oven features a fan-assisted design which ensures even heat distribution and faster cooking times, while the secondary oven is ideal for slow cooking and baking.

The gas hob on the Rangemaster RDW6012FI/SF comes with six burners, providing a range of cooking options from simmering delicate sauces to rapidly boiling water. The burners are designed with precision in mind, offering adjustable flame control for accurate cooking temperatures. Additionally, the cast iron pan supports provide durability and stability for pots and pans of all sizes.

In terms of technology, this range cooker incorporates advanced safety features. The flame failure device ensures that gas is automatically cut off if the flame goes out, providing peace of mind while cooking. Furthermore, the RDW6012FI/SF is energy-efficient, making it an environmentally friendly choice while also helping to lower energy bills.

The sleek stainless steel finish of the Rangemaster RDW6012FI/SF adds a touch of elegance to any kitchen décor. The design includes easy-to-use rotary controls and a digital clock, enhancing user experience and functionality. The removable oven doors and easy-clean enamel interiors also make maintenance a breeze, allowing for effortless cleaning after cooking.

Overall, the Rangemaster RDW6012FI/SF is a well-rounded appliance that caters to the needs of both amateur cooks and seasoned chefs. With its impressive features, advanced safety technology, and stylish design, it is a standout choice for those looking to upgrade their kitchen with a reliable range cooker.