Timer Function

Fig.2-15

ArtNo.317-0007 60 Setting the zone timer

Fig.2-16

��

ArtNo.317-0007 60 Setting the zone timer

Fig.2-17

��

ArtNo.317-0007 60 Setting the zone timer

Fig.2-18

��

ArtNo.317-0018 60 Setting the minute timer

The timer has two settings:

•Zone timer

•Minute timer

Zone Timer

This allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn oﬀ automatically.

Activating the timer:

Select the required cooking zone and then:

1.Using the ‘+’ and ‘–‘ keys, set the desired cooking temperature.

2.Press the timer key (Fig.2-15): the timer display will illuminate with ‘00’ ﬂashing.

3.Set the required cooking duration by pressing the timer key to increase the cooking time and the ‘–‘ key to reduce the cooking time (Fig.2-16).

Note: When the ‘00’ is ﬂashing, pressing the ‘–‘ key will set the timer to 60 minutes.

The timer will activate automatically within a few seconds and an indicator light will appear in the timer display corresponding the activated zone (Fig.2-17).

Changing a previously set cooking time:

Select the required cooking zone; the red dot will light up in the display. Press the timer key once then press the ‘timer’ key to increase, or the ‘–‘ key to reduce the cooking time.

Interrupting the timer:

Select the required cooking zone; the red dot will light up in the display. Press the timer key and, using the ‘–‘ key, reduce the cooking time to ‘00’. This will switch oﬀ the timer but leave the cooking zone on until manually deactivated.

Turning oﬀ the timer alarm:

At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm.

Cancelling the timer (rapid shutdown):

Select the required cooking zone; the red dot will light up in the display. Press both the ‘+’ and ‘–‘ keys simultaneously. Note that this will turn oﬀ both the timer and the cooking zone immediately.

Minute Timer

The timer can also be used as a simple minute timer, up to a maximum of 99 minutes.

Setting the timer:

Make sure that none of the cooking zones has been selected (if a zone has been accidentally selected simply leave the hob for 10 seconds: the dot in the zone display will go out). Press the timer key and then set the required time, using the timer and ‘–’ keys (Fig.2-18).