Rangemaster RI60 manual Hob Check, Customer Care

INSTALLATION

Check the appliance is electrically safe when you have finished.

Fig.5-4

�������

�����

������

�������

Secure the hob to the worktop using the brackets supplied.

���The positioning of the bracket (and sleeve) is dependent on the thickness of the worktop as shown in (Fig.5-4).

Note: Slide the optional sleeve onto the bracket if fitting to thin work surfaces.

Locate the bracket to the slot on the hob base and then tighten the retaining screw until it is locked to the worktop.

���������	Electrical Connections
�����

������� ArtNo.317-0012 - Hob fittings 1

�����

This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical

���Engineers (I.E.E.) regulations and also the local electricity supply company requirements.

 WARNING: THIS APPLIANCE MUST BE EARTHED

�������

���������

Note: All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings. Connection to the electrical supply can be made with either a plug and socket, or be permanently wired via a double pole

�����switch.

Fig.5-5 � � ��

�����

ArtNo.130-0008 - Electrical connections Induction hob

� �� �� ��

The electrical cable to be fitted must be 250V high temperature PVC (85°C), 2.5mm² minimum conductor size.

Connect the hob up as shown in Fig.5-5and Fig.5-6.

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Green and yellow:	Earth
Blue:	Neutral
Brown:	Live

Hob Check

Check each cooking zone in turn.

Customer Care

Please complete your contact details in the front of this section. Please inform the user how to operate the hob and hand over the instruction pack.

Thank you.

��������

Fig.5-6	400V 2N		H05RR-F4x2.5
	2		4
	1	3	5
	L1	L2	N

ArtNo.314-0010 Induction electrical label

230V H05RR-F3x2.5

2 4

1 3 5

L N

12