For the cycle, Pause, Run | Hoover HEDS 668S-80, HEDS 668-80

For the heaviest soiled loads,	Pre-rinse
such as pots,pans,casserole	Pre-rinse (45°C)	8/24 gr
dishes and dishes that have	Wash (70°C)	8/24 gr
been sitting with dried food	Rinse (75°C)
on them for a while.	Drying
	Drying
For normally soiled loads,	Pre-rinse
For normally soiled loads,	Wash (50°C)
such as pots, pl ates,glasses	Wash (50°C)	4/20 gr
and lightly soiled pans.	Rinse (70°C)	4/20 gr
standard daily cycle.	Drying

	Pre-rinse
For lightl y soi led loads,such	Wash (45°C)	4/20 gr
as plates,glasses,bowls and	Rinse (65°C)	4/20 gr
as plates,glasses,bowls and
lightly soiled pans.
lightly soiled pans.	Drying
	Drying

Daily wash in only 1 hour.	Pre-rinse
Suitable for normal soiled	Wash (70°C)	20 gr
dishes that are to be washed	Wash (70°C)	20 gr
dishes that are to be washed	Rinse (65°C)
straight after a meal (max 6 plate	Rinse (65°C)
straight after a meal (max 6 plate	Drying
settings).	Drying
settings).
	Wash (50°C)
A shorter wash for lightly soiled	Rinse (55°C)	15 gr
loads (max 4 plate settings).	Drying

	To rinse dishes that you	Pre-rinse
	plan to wash later that day.	Pre-rinse
	plan to wash later that day.

1Draw out the lower and upper basket, load the dishes and push them back. It is recommended that loading the lower basket first, then the upper one (see the section entitled

" Loading the Dishwasher " ).

2Pour in the detergent(see the section entitled, " Salt, Detergent and Rinse Aid " ).

3With a little force to ensure the door is properly closed. NOTE: A click could be heard when the door is closed

perfectly.

4Insert the plug into the socket.

The power supply is 220-240VAC 50Hz, the specification of the socket is 12A 250 VAC, Make sure that the water supply is turned on to full pressure.

5Press the ON/OFF button

6	Turn the knob located on the right of the control panel in
	the clockwise direction until the number or the symbol
7	for the cycle
	Press the Start/Reset button to start the washing.

8When the washing is over, you can shut off the switch by pressing on/off button.

Premise: A cycle that is underway can onl y be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. In this case, the detergent

dispenser must be refilled (see the paragraph entitled " Loading the Detergent " ).

1Please p ress the Sta rt/Re set b utton and last more th an three seconds, this will cancel the current prog ramme. (NOTE: turning off the ap pliance by pressing th e on/off button can no t cancel the curr ent programme, because this model has a "broken reme mber" function.)

2Turn around the Washing Program Selector to select the desired programme.

3Press the Start/Reset button to start the washing.

NOTE: If you open the door when washing, the machine will pause. When you close the door and press the Start/Reset button, the machine will keep on working after 10 seconds.

The four program lights shows the state of the dishwasher:

a)All program lights off- -----------	-----stand by
b)One of the program lig hts on----------	-pause
c)One of the program lights b linking-- -----	run

If all t he lights begin to glimmer, that indicates the machine is out of order, please turn off the main power and water suppl y before calling a service.

HEDS 668S-80, HEDS 668-80 specifications

The Hoover HEDS 668-80 and HEDS 668S-80 are advanced sensor modules widely recognized for their precision and reliability in various applications. Both models serve prominently in the realm of motion detection and optical encoders, making them indispensable in robotics, industrial automation, and consumer electronics.

At the core of these sensors is the use of integrated photodetectors and light emitters, which work together to accurately capture motion data. The HEDS 668-80 features a compact design, allowing for easy integration into numerous hardware configurations. It incorporates a dual-channel output, which provides both quadrature and single-ended output signals. This feature enables enhanced motion control and allows for more accurate detection of direction, making it suitable for applications requiring precise angular measurements.

One of the standout technologies in the HEDS series is its use of reflective optical sensing. This technology minimizes interference from ambient light conditions, ensuring reliable performance even in varying environmental settings. The sensors are designed with a resolution of up to 500 counts per revolution, allowing for finely-tuned control in robotic applications.

The HEDS 668S-80 enhances the capabilities found in the 668-80 model by offering an increased tolerance for temperature variations and shock resistance. This makes it an ideal candidate for harsh operating conditions, where reliability is paramount. The HEDS 668S-80 also boasts an improved response time, further enhancing the performance in high-speed applications.

Both models feature a straightforward mounting system that facilitates installation and adjustment, allowing engineers to set up their systems quickly and efficiently. Additionally, their robust construction ensures durability across extended periods of use, providing a long lifespan in demanding applications.

In summary, the Hoover HEDS 668-80 and HEDS 668S-80 represent advanced sensor technology that combines high performance with robust design. Their integrated features cater to a variety of applications, making them a vital component in the ever-evolving landscape of automated systems and precision measurement. As industries increasingly rely on automation, these sensors offer the reliability and accuracy that engineers need to achieve optimal performance in their projects.

for the cycle

Press the Start/Reset button to start the washing.

-pause

run

HEDS 668S-80, HEDS 668-80 specifications