hussman IGSS-FMSS-0301 manual Plexiglass & Acrylic Care, Replacing Fluorescent Lamps

Page 14

IGSS-FMSS-0301

Soap and hot water are not enough to kill this bacteria. A sanitizing solution must be included with each cleaning pro- cess to eliminate this bacteria.

1.Scrub thoroughly, cleaning all surfaces, with soap and hot water.

2.Rinse with hot water, but do not flood.

3.Apply the sanitizing solution according to Hussmann’s directions.

4.Rinse thoroughly.

5.Dry completely before resuming operation.

CLEANING GLASS & MIRRORS

Only use a soft cloth and mild glass cleaner for cleaning any glass or mirrored components. Be sure to rinse and/ or dry completely.

Never use hot water on cold glass surfaces! It may shatter and cause serious injury! Allow glass

surfaces to warm first.

PLEXIGLASS & ACRYLIC CARE

Improper cleaning not only acelerates the cleaning cycle but also degrades the quality of this surface. Normal daily buffing motions can generated static cling attracting dust to the surface. Incorrect cleaning agents or cleaning cloths can cause micro scratching of the surface,causing the plastic to haze over time.

CLEANING

Hussmann recommends using a clean damp chamois, , or a paper towel marketd as dust and abrasive free with 210® Plastic Cleaner and Polish available by calling Sumner Labs at 1-800-542-8656.Hard,rough cloths or paper tow- els will scratch the acrylic and should not be used.

ANTISTATIC COATINGS

The 210® has proven to be very effective in not only clean- ing and polishing the Plexiglass surface, but also providing anti-static and anti-fog capabilities.This product also seals pores and provides a protective coating.

Maintenance

BEFORE SERVICING – Always disconnect electrical power at the main disconnect when servicing or replacing any electrical component

This includes (but not limited to) Fans, Heaters,

Thermostats, and Lights.

REPLACING FLUORESCENT LAMPS

Fluorescent lamps are furnished with moisture resistant lamp holders, shields and end caps.Whenever a florescent lamp is replaced, be certain to reinstall the lamp shield and end caps over the lamp.The lamps supplied are single slim-line or bi-pin type with or without starters.

COPPER COILS

The copper coils used in Hussmann merchandisers may be repaired in the field. Materials are available from local refrigeration wholesalers.

Hussmann recommends using #15 Sil-Fos for repairs.

TIPS & TROUBLESHOOTING

Before calling for service, check the following:

1.Check electrical power supply to the equipment for connection.

2.Check fixture loading. Overstocking case will affect its proper operation.

3.If frost is collecting on fixture and/or product, check that Humidity Control is working properly, and that no outside doors or windows are open—allowing moisture to enter store.

ENCAPSULITE

SHATTERPROOF COATING - SA 10645

RU

Complies with FDA USDA

 

R

 

 

 

& OSHA Regulations

NSF

 

 

for replacement call:

1-800-395-9229

Turn switch off then on after replacing bulb

FOR PROMPT SERVICE

When contacting the factory,

be sure to have the Case Model and Serial Number handy. This information is on a plate located on the case itself.

EVAPORATOR FANS

The evaporator fans are located at the center front of these merchandisers directly beneath the display pans.

14

Image 14
Contents Fmss Apparent Loss or Damage This Booklet Contains Information onShipping Damage Concealed Loss or DamageCut & Plan Views FmssLocation Setting and JoiningLeveling Uncrating the StandJoint Trim InstallationInstalling Condensate Drain Waste Outlet and P-TRAPStat Location Electrical Wiring Color CodeField Wiring & Serial Plate Amperage Electrical Circuit IdentificationFmsscases Wiring DiagramCasewiringdiagram Fmsscases Diagram 6CASEWIRING8CASEWIRINGDIAGRAM W1400002Cases Diagram Fmss 10CASEWIRINGWIRINGCASE12 Diagram M MStocking Case CleaningCleaning Precautions When Cleaning Important StepsReplacing Fluorescent Lamps Tips & TroubleshootingPlexiglass & Acrylic Care Specifications Fmss Medium TempType of Refrigerator Typical Entering Air Temperature AppendicesAppendix D. Recommendations to user IGSS-FMSS-0301 Limited Warranty Model Serial Number

IGSS-FMSS-0301 specifications

Hussman IGSS-FMSS-0301 is a state-of-the-art frozen food merchandising display unit designed to meet the demands of modern retail environments. This innovative piece of equipment is tailored for supermarkets, convenience stores, and food service operations looking to optimize their frozen food sales. With its sleek design and advanced technology, the IGSS-FMSS-0301 enhances product visibility while ensuring optimal preservation of goods.

One of the main features of the IGSS-FMSS-0301 is its exceptional energy efficiency. Incorporating the latest in refrigeration technology, it utilizes a highly efficient compressor system that minimizes power consumption while maintaining ideal temperatures for frozen products. This contributes significantly to reduced operational costs, making it an environmentally friendly choice for retailers.

The display case boasts an impressive capacity, allowing retailers to showcase a wide range of frozen products, from ice cream and frozen meals to ready-to-eat options and frozen vegetables. Its adjustable shelving and modular design provide flexibility in product placement, enabling users to customize the layout according to their merchandising needs. Additionally, the glass front and top offer maximum visibility, encouraging impulse purchases by allowing customers to easily see the products available.

In terms of technology, the IGSS-FMSS-0301 is equipped with advanced digital temperature controls, which ensure that the internal environment remains stable and consistent. This feature is crucial for maintaining the integrity of frozen goods and preventing freezer burn or spoilage, ultimately enhancing customer satisfaction. The unit also incorporates an automatic defrost system, which minimizes maintenance and ensures reliable performance throughout its lifespan.

Furthermore, the Hussman IGSS-FMSS-0301 is designed with user convenience in mind. It is easy to access and restock, facilitating efficient operation for store staff. The robust construction ensures durability, and the attractive exterior can complement any retail setting.

In conclusion, the Hussman IGSS-FMSS-0301 stands out with its energy efficiency, spacious design, advanced technology, and user-friendly features. It serves as an ideal solution for retailers aiming to enhance their frozen food merchandising while ensuring optimal product presentation and preservation. This display unit not only boosts sales potential but also reinforces the overall shopping experience by making frozen items easily accessible and appealing to consumers.