Indesit DIF 16, DIF 04 Installation, Positioning and levelling, Connecting the water inlet hose

Page 2

Installation

Keep this instruction manual in a safe place for EN future reference. If the appliance is sold, given away or

moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4.Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Connecting the water and electricity supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

Connecting the water inlet hose

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see adjacent information).

The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti- flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it contains live electrical parts.

*Only available in selected models.

2

Image 2
Contents Contents Operating instructionsConnecting the water inlet hose InstallationConnecting the water and electricity supplies Positioning and levellingTechnical data Advice regarding the first wash cycleConnecting the water outlet hose Anti-condensation stripElectrical Connection Control panel Description of the applianceOverall view Cutlery basket Loading the racksLower rack Upper rackMeasuring out the detergent Start-up and useStarting the dishwasher Wash cycles Dishwasher, reduce the amount of detergent used accordinglyMeasuring out the refined salt Rinse aid and refined saltMeasuring out the rinse aid Care and maintenance Disposal Precautions and adviceGeneral safety Saving energy and respectingTroubleshooting

DIF 04, DIF 16 specifications

Indesit is well-known for producing high-quality kitchen appliances, and their dishwashers, particularly the Indesit DIF 16 and DIF 04 models, exemplify this commitment to efficiency and convenience. These built-in dishwashers are designed to blend seamlessly into your kitchen, offering a combination of practicality and modern technology.

The Indesit DIF 16 is distinguished by its spacious design, capable of accommodating up to 13 place settings. This makes it perfect for families or those who entertain frequently. Its energy efficiency is commendable, achieving an energy rating of A+. This not only helps to reduce environmental impact but also ensures lower energy bills. Consumers will appreciate the four wash programs, including rapid and eco modes, which provide flexibility to tackle different levels of soiling efficiently.

On the other hand, the DIF 04 model focuses on simplicity and user-friendliness. With a slightly more compact design yet still offering room for up to 10 place settings, it is an ideal choice for smaller households or kitchen spaces with limited room. One of its standout features is the adjustable upper rack, which allows users to create extra space for taller items, ensuring optimal loading convenience without sacrificing performance.

Both models employ advanced technology, such as the innovative water spray system that maximizes cleaning power by reaching every corner of the dishwasher. The use of smart sensors helps in optimizing water and energy usage for each cycle, enhancing the efficiency of every wash. Additionally, they come equipped with a delay start feature, granting users flexibility to run the dishwasher during off-peak hours for added savings.

Moreover, the Indesit DIF 16 and DIF 04 are designed with noise reduction technologies, making them quieter than many competitors, a significant consideration for kitchens that serve as social spaces. The sleek, modern appearance of both dishwashers is complemented by intuitive controls, making them accessible to users of all experience levels.

In conclusion, the Indesit DIF 16 and DIF 04 dishwashers stand out for their combination of practicality, efficiency, and user-friendly features. They represent an excellent choice for anyone looking to improve their kitchen's functionality while maintaining a commitment to sustainability and energy conservation. With their thoughtful designs and reliable performance, these dishwashers are smart additions to any home.