Removal and Replacement Procedures
3.Disconnect the modem board cable 1 from the modem board.
4.Remove the two PM2.0×3.0 screws 2 that secure the modem board to the system board.
5.Lift the rear edge of the modem board 3 to disconnect it from the system board.
6.Remove the modem board.
7.If the modem board cable must be replaced, remove the tape 4 that secures the cable to the system board and disconnect the cable 5 from the system board.
✎The modem cable is included with the modem board and is also included in the Miscellaneous Plastics Kit, spare part number
Removing the Modem Board
Reverse the above procedure to install the modem board.
Maintenance and Service Guide |
