Compaq NC4000 manual Removing the System Board Screws

Removal and Replacement Procedures

3.Remove the following screws:

❏Two T8M2.0×6.0 screws 1 from the rear panel

❏One T8M2.0×4.0 screw 2 in the upper right corner of the system board

❏One T8M2.0×4.0 screw 3 in front of the hard drive bay

❏One T8M2.0×4.0 screw 4 in the lower left corner of the system board

4.Use a 5.0-mm socket to remove the two M2.0×9.0 standoffs 5 that secure the system board to the base enclosure.

Removing the System Board Screws

5–44 Maintenance and Service Guide