Compaq NC4000 manual Removing the Heat Sink Screws

Removal and Replacement Procedures

4.Disconnect the fan cable 1 from the system board.

5.Loosen the two spring-loaded T8 M2.0×10.0 screws 2 that secure the heat sink to the base enclosure.

6.Fold back the insulator material 3 to expose the heat sink screws.

7.Remove the four T8 M2.0×4.0 screws 4 that secure the heat sink to the base enclosure.

Removing the Heat Sink Screws

Maintenance and Service Guide 5–23