Compaq NC4000 manual Removing the Hard Drive from the Hard Drive Frame

Removal and Replacement Procedures

c.Remove the two Torx T5 M2.5×4.5 screws 1 and the two PM2.5×3.5 screws 2 that secure the hard drive to the hard drive frame.

d.Use a 4.0-mm socket to remove the two M2.0×10.0 alignment pins 3 from the back of the hard drive.

e.Remove the hard drive from the hard drive frame 4.

Removing the Hard Drive from the Hard Drive Frame

f.Remove the two PM2.0×3.0 screws 1 that secure the hard drive upper bezel to the hard drive frame.

g.Remove the upper bezel from the frame 2.

Removing the Hard Drive Upper Bezel

Maintenance and Service Guide 5–7