7.Turn the temperature regulator 8 back to hea- ting level 1 to keep liquid foods warm. Turn the temperature regulator 8 to heating level 2 for keeping solid foods warm. Occasionally stir so- lid foods while they are being kept warm and mix a small amount of water into them to avoid a possible spoiling or burning of the food.

Cleaning and care

Important!

First of all, ALWAYS remove the power cable 5 from the wall socket before cleaning the Electrical Wok and its components! Otherwise, there is the great risk of receiving an electric shock!

Important!

NEVER submerge the thermo-plinth 7 in water to clean it! The appliance could become irreparably damaged!

After using the Electrical Wok always wait until the thermo-plinth 7 and the Wok 3 have cooled down completely!

The risk of burns is ever present!

When you have removed the power cable 5 of the Electrical Wok from the wall socket, and the Wok 3 and the thermo-plinth 7 have cooled down …

1.Using the wooden spoon w, remove the largest pieces of food remnants from the Wok 3.

2.Wash the Wok 3 thoroughly in warm water with a mild washing-up detergent. Do not use any abrasive cleaners or scouring pads, these will destroy the non-stick surfaces of the Wok 3 and impair their effectiveness!

3.Clean the housing of the themo-plinth 7 with a moist sponge.

Storage

Remove the power cable 5 from both the wall socket and the thermo-plinth 7 when the app- liance is not being used.

Allow the Wok and its components to cool down completely before storing them away.

For the sake of safety, ALWAYS store the Electrical Wok out of the reach of children.

Troubleshooting

Should the Electrical Wok not function or not function correctly …

1.Check to ensure that the power cable 5 is cor- rectly connected to the thermo-plinth 7.

2.Check to ensure that the power cable 5 is cor- rectly connected to the wall socket.

3.Check to ensure that the wall power socket to which the Electrical Wok is connected is "live", do this by connecting another appliance to it.

If the malfunction cannot be traced back to one of these causes …

4.Remove the power cable from the wall socket and allow the thermo-plinth 7 to cool down completely.

5.Re-insert the power cable 5 into a wall power socket.

Should the malfunction not be corrected by the measures described above, please make contact with one of our service-partners in your locality.

- 6 -

Page 8
Image 8
Kompernass KH 1099 manual Cleaning and care, Storage, Troubleshooting, Risk of burns is ever present