Installation of the cooker

Installation

Before moving your cooker check that it is cool, and switch off at the cooker control unit. Movement of your cooker is most easily achieved by lifting the front as follows:

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged. (FIG. C)

Splashplate optional, apply to Parts Department (see Back Cover for contact number.)

The following instructions should be read by a qualified technician to ensure that the appliance is installed, regulated and technically serviced correctly in compliance with current regulations.

Important: remember to unplug the appliance from the mains before regulating the appliance or carrying out any maintenance work.

Positioning

Important: this unit may be installed and used only in permanently ventilated rooms according to the British

Standards Codes Of Practice: B.S. 6172/B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The following requirements must be observed:

a)The cooker should not be installed in a bed sitting room with a volume of less than 20m3. If it is installed in a room of volume less than 5m3 an air vent of effective area of 110cm2 is required, if it is installed in a room of volume between 5m3 and 10m3 a supplementary airvent area of 50cm2 is required, if the volume exceeds 11m3 no airvent is required. However, if the room has a door or a window which opens directly to the outside no air vent is required even when the volume is between 5m3 and 11m3.

b)During prolonged use of the appliance you may consider it necessary to open a window to the outside to improve ventilation.

c)If there are other fuel burning appliances in the same room, B.S.5440 Part 2 Current Edition, should, be consulted to determine the requisite air vent requirements.

For a correct installation of the cooker the following precautions must be followed:

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

NOTE:This appliance must not be fitted on a platform.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm. (Fig.A)

a)The cooker may be located in a kitchen, a kitonen/diner or bed sitting room, but not in a bathroom or shower room.

b)The hoods must be installed according to the requirements in the hood handbook.

c)The wall in contact with the back of the cooker must be of flameproof material.

d)The cooker is fitted with a safety chain that must be attached to a hook, secured to the wall behind the appliance.

Note: some models can have their gas connection inverted. It is important to make sure the safety chain is always situated on the side which corresponds to the hose holder (Fig. B).

	mm	150 mm
	650	150 mm
	650
	150 mm

Fig. A

Fig. B

Fig. C

KD3G11/G specifications

The Indesit KD3G11/G is a versatile and efficient freestanding gas cooker designed to enhance your cooking experience while providing a range of practical features. With its classic design and modern functionalities, it is an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the KD3G11/G is its four gas burners, which vary in size, allowing users to choose the most appropriate heat source for their dishes. The powerful burners offer precise temperature control, making it easy to simmer, boil, or sear with professional results. The easy-to-use rotary controls enable quick adjustments for a seamless cooking experience.

The cooker also includes a spacious main oven with a generous capacity, perfect for baking, roasting, or cooking multiple dishes simultaneously. The conventional oven heat distribution ensures that food is cooked evenly, while the oven's grill function provides additional flexibility for achieving that perfect golden finish on meats and other dishes.

Another notable technology in the Indesit KD3G11/G is its automatic ignition system. This innovative feature allows users to light the burners with ease, eliminating the need for matches or lighters. This not only enhances safety but also adds convenience to your cooking routine.

Safety is a paramount consideration in the design of the KD3G11/G. It comes equipped with a flame safety device, which immediately cuts off the gas supply if the flame is extinguished, providing peace of mind while cooking. Additionally, the durable enamel oven interior is easy to clean, helping to maintain a hygienic cooking environment with minimal effort.

The sleek and modern outer design, complemented by a classic white finish, allows this cooker to blend seamlessly into any kitchen décor. It is compact enough to fit into smaller spaces while still providing ample cooking power and capacity.

In summary, the Indesit KD3G11/G gas cooker combines practicality, safety, and style. Its user-friendly features, reliable performance, and stylish appearance make it a popular choice for anyone looking to enhance their culinary skills or simply enjoy everyday cooking. Whether you're preparing a family meal or hosting a dinner party, this cooker provides the functionality and reliability needed to create delicious dishes with ease.