JBL SB210, SB-2 manual System #3 in Stereo, System #3 on 70V/100V Distributed Line

System #3 in Stereo

SPL (at 20 Feet):

95 dB Continuous (peaks of 105 dB)

Left

Control 28

	Left
From	Input
Power	Terminals
Amp
	Right

Satellite Outputs

Right

Control 28

SUBWOOFER:

Control SB-210 &

MTC-210-SAT Crossover Input Module

MODULE SETTINGS:

Stereo / Mono Selector: Stereo

4-Ohm / 8-Ohm Selector: 8-Ohms

Control SB-210 with

MTC-210-SATCrossover Input Module

Stereo System Connection Note

Ensure that the polarity hookup of the left and right inputs is correct. If one of the inputs is connected backwards (out of polarity), the sub-

woofer will not produce much (if any) bass.

System #3 on 70V/100V Distributed Line

SPL (at 20 feet, by tap seetting on SB210):

At 250W Tap: 90 dB Continuous (100 dB peak)

At 125W Tap: 87 dB Continuous (97 dB peak)

At 78W Tap: 84 dB Continuous (94 dB peak)

	Left	Right
	Control 28	Control 28
	(NOT Control 28T-60)	(NOT Control 28T-60)
		Satellite
		Outputs
From
70V or 100V	Left/Mono
Power
		MODULE SETTINGS:
Amp
	Input	Stereo / Mono Selector: Mono
	Terminals	4-Ohm / 8-Ohm Selector: 8-Ohms

Control SB-210 with

MTC-210T-SATCrossover Input Module

11