JBL SB210 Pcs Control 24C with Control SB-210, Max Continuous Average SPL at 10 feet 96 dB

Systems with

IN-CEILINGSatellite Speakers

In-ceiling loudspeakers can benefit from the addition of a subwoofer. Often that takes the form factor of an in-ceiling subwoofer like Control 19CS or Control 312CS, but it may be desirable to use a subwoofer with a full passive crossover. For more information about model selection, see the “Subwoofer Model Selection” and “Designing for Other JBL Subwoofer Models” sections, above.

The SB-210 with MTC-210-SAT module is a subwoofer that contains a built in passive crossover, which makes it easy to structure subwoofer/satellite systems. With in-ceiling satellite speakers, the SB-210 can be mounted on a wall or ceiling via the MTC-210U U- bracket, suspended from the ceiling via built-in suspension points, or installed above an air grate grille in the ceiling.

System #6

4 pcs Control 24C with Control SB-210

Application: Medium volume, high-fidelity music reproduction where 4 in-ceiling satellite speakers are needed

to cover the area.

Max Continuous Average SPL (at 10 feet): 96 dB

(with peaks of 106 dB).

4 Ohm / 8 Ohm Setting: 4 Ohms.

Stereo/Mono Capability: Either setting can be utilized

Connection

Mono Operation – Connect input to the LEFT input termi- nal. Put Stereo/Mono header into MONO position. Con- nect 2 pcs of Control 24C to each satellite output (LEFT and RIGHT). Do NOT connect all 4 satellite speakers to a single satellite output.

Stereo Operation – Connect left and right inputs to the LEFT and RIGHT input terminals. Put Stereo/Mono header into STEREO position. Connect 2 pcs of Control 24C to each of the Satellite Outputs (LEFT and RIGHT)

System #6 in Mono

SPL (at 10 Feet):

96 dB Continuous (peaks of 106 dB)

Control 24C Control 24C

Left

From	Left/Mono
Power
Amp
	Input
	Terminals

Satellite Outputs

Control 24C Control 24C

Right

Control 29AV-1

(8 Ohm Setting)

SUBWOOFER:

Control SB-210 &

MTC-210-SAT Crossover Input Module

MODULE SETTINGS:

Stereo / Mono Selector: Mono

4-Ohm / 8-Ohm Selector: 8-Ohms

Control SB-210 with MTC-210-SATCrossover Input Module

16