Indesit KD6G25W, KD6G25M Safety Requirements for Deep FAT Frying, HOW to Deal with a FAT Fire

Page 9

Hotplate

SAFETY REQUIREMENTS FOR DEEP FAT FRYING

1.Never fill chip pans more than one third full with oil or fat.

2.Never leave oil or fat unattended during the heating or cooling period.

3.Never heat fat or fry with a lid on the pan.

4.Always dry food thoroughly before frying, and lower it slowly into the hot oil or fat. Frozen foods in particular will cause frothing and spitting if added too quickly.

5.Always keep the outside of the pan clean and free from streaks of oil or fat.

HOW TO DEAL WITH A FAT FIRE

1.Do not move the pan.

2.Turn off the hotplate burners.

3.Smother the flames with a fire blanket or damp cloth to extinguish the fire. Do not use water or a fire extinguisher as the force of it may spread the burning fat or oil over the edge of the pan.

4.Leave the pan for at least 60 minutes before moving it.

9

Image 9
Contents Free Standing Gas Cooker Contents Introduction Please read the precautions below before using your cooker For your SafetyNever Clock and Minute Minder To Set Time of DayTime of DAY is NOW SET Bleeper Sound To Set the Minute MinderTo USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill PAN and Handle GrillRelighting the Burner To USE the GrillGrill To USE the Main Oven Main OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMeat and Poultry Main Oven Cooking ChartYeast Mixtures Guidance on Using the TOP Oven Top OvenTo USE the TOP Oven Top Oven Cooking Chart Small Cakes 16 per tray Middle Mins Replacement of Oven Light Bulb Care and CleaningCooker Finish Cleaning Method Something Wrong with your Cooker Problem CheckMay be necessary to increase or decrease GAS Safety Installation & USE Regulations Installation InstructionsModel Numbers KD6G25W, KD6G25M LocationTechnical Data G20 at 20mbar G30 at 28-30mbar G31 at 37mbarBurner Cooker Hoods Space for FixingUnpacking the Cooker LevellingConversion for USE on Butane G30 or Propane G31 Stability Chain Connecting to GAS SupplyConnect to a 230-240V A.C. Supply only Electrical ConnectionsInstallation and Operational Checks If it Still Won’t Work Contact the Service Office UK 08709 066Key Contacts