| Electrical connection | |
GB | ||
! Ovens with a | ||
| designed to operate with alternated current at the | |
| ||
| supply frequency and voltage indicated on the data | |
| plate (at the bottom of the oven dashboard). The | |
| earthing conductor of the cable is the | |
| conductor. | |
| Two types of connection are provided: | |
| Connection n° 1 |
Connect Brown wire to terminal marked “L” or coloured Red. Connect Blue wire to terminal marked “N” or coloured Black. If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse.
A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board.If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.
How to connect an alternative plug
Connecting the power supply cable to the mains. |
Fit a normalized plug to the cable, which corresponds to the load indicated on the data plate; if the cooker is connected directly to the mains, an omnipolar
The wires in this mains lead are coloured in accordance with the following code:
BLUE“NEUTRAL” (N) BROWN “LIVE” (L)
GREEN AND YELLOW “EARTH” (E)
GREEN &
YELLOW
BROWN
BLUE
13 amp fuse
CORD GRIP
positioned so that it does not exceed room temperature by 50°C at any point of its length. Before making the connection check that:
•the circuit breakers or fuses of the home system can support appliance load (see data plate);
•the power supply system has an efficient earthing connection which complies with the provisions of current regulations and the law;
•there is easy access to the socket or the omnipolar
!do not use reducers, adapters or shunts as these could cause heating or burning.
Connection n° 2
Disposing of the plug.
!THIS APPLIANCE MUST BE EARTHED.
Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:
!the wires in the mains lead are coloured in accordance with the following code:
Green & Yellow | |
Blue | |
Brown |
|
If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.
Connect Green & Yellow wire to terminal marked “E” or 6 or coloured Green or Green & Yellow.
Disposing of the appliance
When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.
!The plug and socket must be easily accessible.
4