Basic Functions
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
●In standby mode, press and holdÇon the system for 5 seconds to switch to demonstration.
To deactivate the demonstration
●Press and holdÇon the system for 5 seconds to switch to standby mode.
Switching the system on
In standby/demonstration mode
●Press STANDBY ON to switch on the last selected source.
●Press CD, TUNER, TAPE (TAPE 1/2) or AUX.
●Press OPEN•CLOSE.
➜ The system will switch to CD mode.
In Eco Power standby mode
●Press ECO POWER to switch on the last selected source.
●Press CD, TUNER, TAPE 1/2 or AUX on the remote control.
Switching the system to standby mode
In demonstration mode
●Press and hold Ç on the system.
In any other source mode (except Eco Power standby mode)
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in standby mode.
Switching the system to Eco Power standby mode (< 1 Watt)
●Press ECO POWER (or press and hold B on the remote control).
➜"ECO PWR" is displayed, then the display screen will go blank.
➜The low power ECO POWER LED will be lighted.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power standby or standby mode.
Dim mode
You can select the desired brightness for the display.
●In any source mode (except Eco Power standby or standby mode), press DIM MODE repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
➜ DIM is shown, except for DIM OFF mode.
English
13