CD/MP3-CD Operations
English
Selecting a desired Album/Title (MP3 disc only)
To select a desired album
●Press ALBUM
To select a desired title
●Press TITLE
➜ The title’s name will scroll through the display once.
Note:
–The album and title will only be displayed once when selected. To view again, press the DISPLAY button repeatedly to display ALBUM and TITLE alternatively.
Repeat play
You can select and change the various play modes before or during playback.
1Press REPEAT on the remote control repeatedly to select :
➜"REPEAT TRACK" – to repeat playback of the current track.
➜"REPEAT DISC" – to repeat playback of the current disc.
➜"REPEAT PROGRAMM" – to repeat playback of the programmed tracks.
2To resume normal playback, press REPEAT until "REPEAT OFF" is displayed.
➜REP is shown, except for REPEAT OFF mode.
Notes:
–During programme play mode, it is not possible to repeat playback the current disc (Repeat Disc mode).
–Pressing theÇSTOP button will cancel all repeat modes.
4Press í or ë repeatedly to select the desired track.
●For MP3 disc, press ALBUM
5Press PROG to store the track.
●Repeat steps
6To end programming, press Ç once.
➜PROG stays and the programme mode remains active.
➜The total number of tracks programmed and the total playing time are displayed.
➜For MP3 disc, total playing time will not be shown.
7To start programme play, pressÉÅ.
➜"PLAY PROGRAM" is displayed.
Notes:
–It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks.
–If the total playing time is more than "99:59" then
–If you attempt to programme more than 99 tracks, "FULL" is displayed.
–During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically.
To review the programme
●Stop playback and pressí or ë repeatedly.
●To exit review mode, press Ç.
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.
1Load the desired discs on the disc tray (refer to “Loading discs”).
2Press DISC 1/2/3 to select a disc.
3Press PROG to start programming. ➜ PROG starts flashing.
Erasing the programme
●Press Ç once when playback is stopped or twice during playback.
➜ PROG disappears and "PROGRAM CLEARED" is displayed.
Note:
–The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened.
For Recording, please refer to “Tape Operation/Recording”.
18