John Lewis JLBICO2 instruction manual Installation, Before installation, After installation

Page 28

Installation

Before installation

•Check that the input voltage indicated on the rating plate is the same as the voltage of the power outlet you are going to use.

•Open the oven door and take out all the accessories and remove the packing material.

•Do not remove the mica cover on the ceiling of the interior! This cover stops fat and pieces of food damaging the microwave generator.

Warning! Warning! The front surface of the oven may be wrapped with a protective film. Before using the oven for the first time, carefully remove this film, starting on the inside.

•Make sure that the oven is not damaged in any way. Check that the oven door closes correctly and that the interior of the door and the front of the oven opening are not damaged. If you find any damage contact the Technical Assistance Service.

•DO NOT USE THE OVEN if the power cable or the plug are damaged, if the oven does not function correctly or if it has been damaged or dropped. Contact the Technical Assistance Service.

•Put the oven on a flat and stable surface. The oven must not be installed close to any sources of heat, radios or televisions.

•During installation, make sure that the power cable does not come into contact with any moisture or objects with sharp edges behind the oven. High temperatures can damage the cable.

Warning! after the oven is installed you must make sure you can access the plug.

After installation

•The oven is equipped with a power cable and a plug for single phase current.

•If the oven is to be installed on a permanent basis it should be installed by a qualified technician. In such a case, the oven should be connected to a circuit with an all-pole circuit breaker with a minimum separation of 3 mm between contacts.

Warning! THE OVEN MUST BE EARTHED.

•The manufacturer and retailers do not accept responsibility for any damage that may be caused to people, animals or property if these installation instructions are not observed.

•The oven only functions when the door is closed correctly.

•After the first use, clean the inside of the oven and the accessories, following the cleaning instructions given in the section 'Maintenance and cleaning'.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents JLBICO2 Microwave Oven Safety information General safetyUtensil safety Child safetyKeep all packaging materials away from children Aluminium containers and foil List below is a general guideFood safety Do not overheat Contents Repairs after sales service Before first use Why food heats upHow a microwave oven works Description of functions But go through glass and china Are absorbed by foodsCancelling a cooking cycle Altering parametersEnd of a cooking cycle Interrupting a cooking cycleProduct description Control panelSetting the clock OperationDisplay Hiding/Displaying the clockChild lock Stopping the turntableCooking with microwave Quick startCooking with microwave + grill Conventional cookingCooking with convection + microwave Use this function to bake and roastThermal grilling Automatic defrostManual defrost Automatic function F1 heating foodImportant Notes Automatic function F2 cookingUse this function to cook fresh food Preparation instructions Automatic function F3 defrosting and toastingUse this function to cook and toast various types of food Hints and tips MicrowaveDefrosting Cooling with microwavesGrill Important pointsSomething not working Microwave + grillReplace the light bulb To replace the light bulbMaintenance and cleaning Cleaning is the only maintenance normally requiredDo not use high pressure or stream jet cleaning appliances Front surfaceEnvironmental information Oven ceilingProceed as follows Turn the grill support by 90ºRepairs after sales service Spare partsInstallation Before installationAfter installation Oven only functions when the door is closed correctlyTechnical data Installation diagramsTechnical data category Page 822191900-A-02008
Top Page Image Contents