John Lewis JLBIHD105 instruction manual Supplied, Canopy, Screws item 12c 2.9 x 9.5mm supplied

Fitting the Upper Chimney

•Expand the sides of the upper chimney stack item 2.1 and place the chimney over the two brackets 7.2.1 ensuring they are well seated.

•	Secure the chimney stack to the brackets 7.2.1 using
	the four self tapping screws item 12c (2.9 x 9.5mm)
	supplied.	2.1
	Fitting the Lower Chimney	2
		8b
• Expand the of the lower chimney stack item 2.2 and place
		2.2
	the chimney over the upper chimney stack item 2.1 and
	the canopy.
•	Secure the chimney stack to the canopy using the two
	screws item 12c (2.9 x 9.5mm) supplied..

• After the chimney has been secured into position, insert the two plastic recirculation grilles item 8a (right-hand) and 8b (left-hand) in the apertures on each side of the chimney. The grilles are marked with two arrows and should be fitted with one arrow pointing upwards and the other toward the front.

•When the hood is used in the recirculation mode ensure that the grilles are properly secured to the recirculation extension spigot item 14.1.

7.2.1

12c

8a

12c

8