Starting a Washing Programme
In this fully integrated appliance the controls are located on the top of the door.When selecting a programme, the door needs to be open.
1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely
2.Turn on the water tap
3.Press the On/Off button
The indicator lights of the programme selection buttons illuminate.
4.Setting and starting the programme
To select a programme, press the button of the programme you wish to select, (see "Washing programmes" chart), the indicator light of the selected programme button remains illuminated while the other programme indicator lights turn off. In the digital display will appear, flashing, the running time of the programme that has been set (in minutes).
Close the dishwasher’s door, the programme will start automatically.
Setting and starting the programme with the delay start
Once the washing programme has been selected press the delay start button until the flashing number of the hours for the delay start will appear in the digital display (from 1h to 19h).
Close the dishwasher door, the countdown starts automatically and will decrease with steps of 1 hour.
The opening of the door during the countdown will not modify the delay start.
Once the delay start has elapsed the programme will start automatically.
Note: The start of the programme or the countdown of the delay start will only commence after the closure of the door.
Until that moment it is possible to modify the settings made.
Note: Once the washing programme has started, a
If the appliance has been installed higher up with a furniture door mounted flush, the optical signal will be no longer visible.
5.To interrupt or cancel a washing programme in progress
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in progress
Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.
Cancel a washing programme in progress
Open the dishwasher door.
Press simultaneously function buttons 2 and 3 for about 2 seconds.After about 2 seconds all the programme indicator lights will illuminate indicating that the running programme has been cancelled.
If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.
6.To cancel a delay start
To cancel a delay start in progress you have to reset the dishwasher; follow the same instructions given in “Cancel a washing programme in progress”. Cancelling a delay start involves also the cancelling of the washing programme set.
In this case you have to set the washing programme again.
21