John Lewis JLBIDW 901 There are problems when operating the dishwasher, Dishes are not clean

Page 25

...there are problems when operating the dishwasher

	Symptom	Possible cause	Solutions

		The dishwasher door has not been properly closed.	Close the door.
	The programme does not start
	The programme does not start	The main plug is not plugged in.	Insert the mains plug.
		The main plug is not plugged in.	Insert the mains plug.

		The fuse has blown in the household fuse box.	Replace the fuse.

		Delay start has been selected.	If dishes are to be washed immediately, cancel
			the delay start.

	There is a whistling noise during	The whistling is not a cause for concern.	Use a different brand of detergent.
	washing

...the wash results are not satisfactory

The dishes are not clean

●The wrong washing programme has been selected.

●The dishes were arranged in such a way as to stop water reaching all parts of the surface.The baskets must not be overloaded.

●The spray arms do not rotate freely due to wrong arrangement of the load.

●The filters in the base of the washing compartment are dirty or incorrectly positioned.

●Too little or no detergent has been used.

●Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been selected.

●The drain hose connection is not correct.

●The salt container cap is not properly closed.

The dishes are wet and dull

●Rinse aid was not used.

●The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

●Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●Increase rinse aid dosing.

●The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

25

Image 25

Contents Jlbidw 901 compact dishwasher Child safety InstallationMaintenance and cleaning Service UseEcological hints Environmental informationFor polyoxymethylene, e.g. plastic clips Contents Control panel Description of the ApplianceRating plate FiltersTechnical specifications InstallationElectrical connection Green andYellow Earth Blue- Neutral Brown- LivePermanent connection Water inlet hose with safety valveWater supply connections Building-in Water outlet hose connectionLevelling Fixing to the adjacent unitsControl Panel Multi-tab function Dishwasher must be switched offActivation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Before using your dishwasher for the first time Setting manuallyWater softener Replace the lower basketFilling with dishwasher salt Setting electronicallyTo fill ExampleRinse aid Adjusting the doseFilling with rinse aid Open the container byLoading cutlery and dishes Using the DishwasherStart the wash programme Not suitableCutlery basket Lower basketCutlery allow it Upper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows So they do not moveFill with detergent Use of detergentClose the lid and press until it locks in place Concentrated detergent Different kinds of detergentDetergent tablets Use of combi tablet detergentsAny Partial load to be Washing ProgrammesDay or when Automatic washing programmeTurn on the water tap Press the On/Off button To cancel a delay startUnloading the dishwasher End of the washing programmeExternal cleaning Maintenance and CleaningCleaning the filters Frost precautionsSomething Not Working Flashing fault code appearsDishes are not clean There are problems when operating the dishwasherWash results are not satisfactory Dishes are wet and dullSpare Parts Repairs After Sales ServiceMod PNC Always insist on genuine spare partsPage 07/06 117994 08/0