John Lewis JLBIDW 901 instruction manual Something Not Working, Flashing fault code appears

Page 24

Something Not Working

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force agent.

Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

...a flashing fault code appears

The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard.

The point-shaped optical signal on the floor beneath the dishwasher’s door is flashing (not visible if the appliance has been installed higher up with a furniture door mounted flush).

Open the dishwasher’s door.

The intervention of an alarm is indicated by:

-the continuous flashing of the indicator light of the running programme,

-a fault code (as described in the chart) is visible in the digital display. Carry out the following suggested corrective actions.

 

Sympton

Possible cause

Solutions

-

in the digital display

The water tap is blocked or furred with

Clean the water tap.

limescale.

 

 

appears

The water tap is turned off.

Turn the water tap on.

 

 

The machine does not fill with water.

The filter (where present) in the threaded

Clean the filter in the threaded hose fitting.

 

 

 

 

hose fitting at the water inlet valve is

 

 

 

blocked.

 

 

 

The water inlet hose has not been correctly

Check the water inlet hose connection.

 

 

laid or it is bent or squashed.

 

-

in the digital display

The sink spigot is blocked.

Clean out the sink spigot.

 

appears

The water drain hose has not been

Check the water drain hose connection.

 

 

The dishwasher will not drain.

correctly laid or it is bent or squashed.

 

-

in the digital display

Anti-flood device has activated.

Close the water tap and contact our extended warranty

 

appears

 

administrators, refer to Repairs - After Sales Service on

 

 

 

page 26.

Once the checks have been carried out, to continue de programme, press the button of the programme that was running before the intervention of the alarm and close the door.The programme will continue from the point at which it was interrupted.

If the fault code reappears or if another fault code not described above appears contact our extended warranty administrators, refer to Repairs - After Sales Service on page 26.

Attention: once having verified which kind of malfunction has occurred, before carrying out the checks the appliance MUST be switched off.

24

Image 24
Contents Jlbidw 901 compact dishwasher Installation Child safetyMaintenance and cleaning Service UseEnvironmental information Ecological hintsFor polyoxymethylene, e.g. plastic clips Contents Description of the Appliance Control panelRating plate FiltersInstallation Technical specificationsElectrical connection Green andYellow Earth Blue- Neutral Brown- LiveWater inlet hose with safety valve Permanent connectionWater supply connections Water outlet hose connection Building-inLevelling Fixing to the adjacent unitsControl Panel Dishwasher must be switched off Multi-tab functionActivation/deactivation of the rinse aid dispenser Audible signals Deactivation/activation of the audible signalsFactory setting audible signals activated Setting manually Before using your dishwasher for the first timeWater softener Replace the lower basketSetting electronically Filling with dishwasher saltTo fill ExampleAdjusting the dose Rinse aidFilling with rinse aid Open the container byUsing the Dishwasher Loading cutlery and dishesStart the wash programme Not suitableLower basket Cutlery basketCutlery allow it Adjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows So they do not moveUse of detergent Fill with detergentClose the lid and press until it locks in place Different kinds of detergent Concentrated detergentDetergent tablets Use of combi tablet detergentsWashing Programmes Any Partial load to beDay or when Automatic washing programmeTo cancel a delay start Turn on the water tap Press the On/Off buttonEnd of the washing programme Unloading the dishwasherMaintenance and Cleaning External cleaningCleaning the filters Frost precautionsFlashing fault code appears Something Not WorkingThere are problems when operating the dishwasher Dishes are not cleanWash results are not satisfactory Dishes are wet and dullRepairs After Sales Service Spare PartsMod PNC Always insist on genuine spare partsPage 07/06 117994 08/0