NCR S10XL manual System Error Messages, Table B-1 Error Messages

Error Messages

System Error Messages

System Error Messages

A system error message indicates a problem with the computer itself. A message of this type normally appears during the power-on self-test, before the operating system prompt appears.

Table B-1 lists system error messages and the corresponding corrective measures.

Table B-1

Error Messages

Message

CMOS battery error

CMOS Checksum Error

Display card mismatch

Diskette drive error

Diskette drive controller error or not installed

Action

Replace the RTC chip or contact your dealer.

Check the RTC chip and the necessary jumper. If the battery is still good, run Setup.

Run Setup.

Diskette may be bad. If not, replace the diskette drive or cable.

Check and connect the control cable to the diskette controller.

Diskette drive A type mismatch	Run Setup and select the proper drive type.
Diskette drive B type mismatch	Run Setup and select the proper drive type.

NCR S10XL Hot Plug Server User Guide B-3