NCR S10XL manual Operation Mode, Epp

Table 4-5

Parallel Port Operation Modes

Using the BIOS Setup Utility

System Security Setup

To deactivate the parallel port, select the Disabled option. If you install an add-on card that has a parallel port whose address conflicts with the parallel port onboard, the system automatically disables the onboard functions.

Check the parallel port address on the add-on card and adjust the address to one that does not conflict.

Operation Mode

This item allows you to set the operation mode of the parallel port. Table 4-5 lists the different operation modes of the parallel port.

Setting	Function
Standard Parallel Port	Allows normal speed operation
(SPP)	but in one direction only
Enhanced Parallel Port	Allows bidirectional parallel port
(EPP)	operation at maximum speed
Extended Capabilities	Allows parallel port to operate in
Port (ECP)	bidirectional mode and at a
	speed higher than the maximum
	data transfer rate
Standard and	Allows normal speed operation
Bidirectional	in a two-way mode
EPP Version Selected	Allows selection of either EPP
	Version 1.7 or 1.9 if the
	Operation Mode of the Parallel
	Port is set to Enhanced Parallel
	Port (EPP)

NCR S10XL Hot Plug Server User Guide 4-23