NCR S10XL manual Jumper Settings, System Board Layout

Configuring the System Board

Major Components

Figure 2-1

System Board Layout

Fast SCSI-2	Interface (narrow)
Fast SCSI-2 Interface (wide)	CPU Board Slot

Power Connector 2

Power Connector 1 (230 watt)

Fixed Disk Drive Interface

Diskette Drive Interface

Parallel Port Interface

COM 2

COM 1

PS/2

Keyboard Connector

PS/2

Mouse Connector

JP3

JP4 PCI SlotsEISA

Expansion Slots

JP1

JP2

Power LED Connector

Hard Disk LED Connector

Fan Connectors

JP5

Turbo Reset

Connector (J23)

JP6

Speaker

Connector (J24)

BIOS

	You have to change the jumper settings on the system
Jumper Settings
	board when you upgrade the CPU or reconfigure the
	system.
	To change a jumper setting, follow these steps:
	1.	Remove the jumper cap from the jumper.
	2.	Position the jumper cap over the two pins for the
		desired setting.

NCR S10XL Hot Plug Server User Guide 2-5