
Sample Configurations
Sample Standard Configuration
Sample Standard
Configuration
A standard configuration might consist of the following:
∙Pentium 166 MHz processor with parity memory support
∙32 MB system memory
∙ISA video board with 1 MB video RAM
∙PCI Ethernet adapter (SMC8432BTA)
∙PCI Token Ring adapter (Olicom
∙2 GB SCSI Fast and Wide disk drive connected to an integrated Adaptec 7870 PCI SCSI controller
∙SCSI
Following are the steps to install and configure this sample configuration.
To install the hardware, follow these steps:
Installing the
Hardware1. Strap the SCSI IDs for the 2 GB SCSI disk drive and the SCSI
2. Install the 2 GB SCSI disk drive in a hot plug carrier and install in the top hot plug bay.
NCR S10XL Hot Plug Server User Guide |