
Using the System Utilities
Using the EISA Configuration Utility
To use the ECU to configure the system, follow these steps:
1.Boot the system with the ECU diskette.
2.Select the system baseboard from the configuration screen.
3.Select 4 - 16 MB Extended Memory from the system baseboard configuration screen. The following options display:
4 MB Ext Memory
8 MB Ext Memory
12 MB Ext Memory
16 MB Ext Memory with
16 MB Ext Memory with
4.Make the selection that is appropriate for your system configuration.
For example, if your system comes configured with
4 MB of system memory, select 4 MB Ext Memory. If your system comes configured with 8 MB of system memory, select 8 MB Ext Memory. If your system comes configured with 12 MB of system memory, select 12 MB Ext Memory.
If your system comes configured with 16 MB or more of system memory, and your system is not configured with an
NCR S10XL Hot Plug Server User Guide |