NCR S10XL manual Memory Address Type System Size Value between 64M Increments

Using the System Utilities

Using the EISA Configuration Utility

MB (24 MB - 16 MB = 8 MB), and enter 8M in the size field.

9.After entering the appropriate selection in the size field, press [Enter]. You are returned to the system baseboard configuration screen.

10.If your system is configured with more than 64 MB of system memory, press [Control] + [R] to select 64 - 128 MB Extended Memory - - - - - - - CTRL-R to add the Memory.

11.Observe the following memory configuration screen:

Memory Address (-) 64		M	Type: SYSTEM
Size 0
(value between	0 - 64M,
in increments	of 4M)

12.Tab down to the size field.

If your system has 128 MB of system memory, enter 64M.

If your system has less than 128 MB of system memory, subtract 64 MB from the amount of total system memory and enter that value in this field. For example, if your system has 96 MB of total system memory, subtract 64 MB from 96 MB to get 32 MB (96 MB - 64 MB = 32 MB), and enter 32M in the size field.

NCR S10XL Hot Plug Server User Guide 5-15