NCR S10XL Configuring the PCI Adapters

Sample Configurations
Sample Standard Configuration
C-6 NCR S10XL Hot Plug Server User Guide
EPP Version Selection [1.7]
Setup Password [None]
Power On Password [None]
11. Press [Esc] to return to the main menu in BIOS
Setup.
To configure the PCI adapters, follow these steps:
1. Select PCI System Configuration from the main
menu in BIOS Setup.
2. Use the up and down arrow keys to select the PCI
slot number. Use the right and left arrow keys to
change the IRQ Level for INTA Pin settings.
• Available IRQ settings are 3, 4 ,5, 7, 9, 10, 11, 14,
15.
• To make IRQ 3 available for selection, you must
disable Serial Port 2 in the System Security
menu.
• To make IRQ 4 available for selection, you must
disable Serial Port 1 in the System Security
menu.
• To make IRQ 7 available for selection, you must
disable Parallel Port 1 in the System Secu rit y
menu.
3. Make the following settings:
• Set PCI IRQ Setting to Manual.
Configuring the PCI
Adapters