Removing an Expansion Board | NCR S10XL specification

Configuring the System Board

Installing and Removing Expansion Boards

3.Gently insert the board into an expansion slot. Make sure the board is securely seated. See Figure 2-17.

4.Secure the board with the bracket screw.

Caution Do not neglect this step. The board uses the screw for grounding.

Figure 2-17

Installing a Board

To remove an expansion board, follow these steps:

Removing an

Expansion Board	1.	Unplug any cables connected to the board.
	2.	Remove the bracket screw and pull the board out of
		the slot.
	3.	Secure a bracket cover to the empty slot with the
		screw.

NCR S10XL Hot Plug Server User Guide

2-27