NCR S10XL manual Inta Intb Intc Intd

Sample Configurations

Sample Standard Configuration

∙Set PCI slot 1 (PCI Ethernet Adapter SMC8432BTA) to IRQ5.

∙Set PCI slot 2 (PCI Token Ring Adapter Olicom OC-3136) to IRQ 14.

∙Set PCI slot 3 to --.

∙Set the On Board SCSI to IRQ 11.

∙Set the VGA Palette Snoop to Disabled.

∙Set the On Board SCSI AIC-7870 to Enabled.

∙Set the Boot Drive to Enabled.

When you finish, the screen should look like the following:

PCI IRQ Setting	[Manual]
	INTA INTB INTC INTD
PCI Slot 1	[ 5]	[ 14]	[--]	[11]
PCI Slot 2	[ 14]	[--]	[11]	[ 5]
PCI Slot 3	[--]	[11]	[ 5]	[14]
On Board SCSI	[11]	[ 5]	[ 14]	[--]
VGA Palette Snoop	[Disabled]
On Board SCSI AIC-7870	[Enabled]
Boot Device	[Enabled]

4.Press [Esc] to return to the main menu in BIOS Setup.

5.Press [Esc], again. Select Yes to save System Settings and PCI Adapter settings, and to reboot the system.

NCR S10XL Hot Plug Server User Guide C-7