Reconfiguring the System
Configuring the System Board
Installing SIMMs
3.Pull the SIMM out of the socket.
Reconfigure the system after installing or removing SIMMs.
To reconfigure the system, follow these steps:
1.Reboot the system. A memory error message appears, indicating that the total memory does not match the value stored in CMOS.
2.Boot the system with the EISA Configuration Utility (ECU) diskette, and configure the baseboard settings for the proper amount of memory. Follow the steps under the heading, “Configuring the System Memory” in Chapter 5.
NCR S10XL Hot Plug Server User Guide |
