Describes the ECU parameters | NCR S10XL manual

Using the System Utilities

Table 5-2 describes the ECU parameters.

Table 5-2

Parameter	Function	Description
/B	BIOS video mode	This parameter causes all screens to be displayed
		using BIOS Int 10H calls. Use this parameter on
		computers with non-standard displays. The
		default mode is to write directly to video
		memory.

/H	High resolution display	If you have an EGA monitor, the utility displays
		in 43-line mode. If you have a VGA monitor, the
		utility displays in 50-line mode.
		If you do not enter this parameter, your screen
		displays 25 lines.

/K	Keyboard only mode	The computer does not support the use of a
		mouse device even if one is present. The default is
		to support a mouse if its driver is loaded in
		memory.

/M	Monochrome display	This parameter displays the screens in black and
		white.

/A	Expanded mode	This mode offers an expanded set of menus with
		additional functionality. This mode may also be
		activated by pressing [Control] + [A] instead of
		[Enter] when the Welcome screen displays.

5-19