Sample Configurations
Sample RAID Configuration
Sample RAID Configuration
| A RAID configuration might consist of the following: | ||
| ∙ | Pentium 166 MHz Processor w/ECC Mem Support | |
| ∙ | 128 MB System Memory | |
| ∙ | ISA Video Board with 1 MB Video RAM | |
| ∙ | PCI Ethernet Adapter (SMC8432BTA) | |
| ∙ | PCI Token Ring Adapter (Olicom | |
| ∙ | PCI RAID Adapter (Mylex) | |
| ∙ | Four 4 GB SCSI wide hard drives connected to the | |
|
| Mylex RAID controller | |
| ∙ | One 2 GB SCSI wide hard drive connected to the | |
|
| onboard | |
| ∙ | SCSI | |
|
| ||
| To install the hardware, follow these steps: | ||
| |||
Installing the | |||
|
| ||
Hardware | 1. | Split the hot plug backplane. | |
| 2. | Strap the 2 GB wide drive as SCSI ID 0. Plug it into | |
|
| the hot plug backplane in drive bay 1 (top). | |
| 3. | Strap the | |
|
| the top, front | |
|
| cable and the narrow SCSI cable to the | |
|
| drive. | |
NCR S10XL Hot Plug Server User Guide |
