NCR S10XL manual Options, Starting the ECU From a Fixed Disk

Using the System Utilities

Using the EISA Configuration Utility

2. Select System, then Print to print a list of the resources.

3. Select View, then Switch, and Jumper Settings to see how to change the switch and jumper settings. Make a note of the information.

4. Exit from the utility.

5. Turn off the system and set the jumpers and switches.

If you have locked the board configuration using Edit and Lock commands, you need to unlock the configuration to make all resources available to the ECU.

To unlock the configuration, follow these steps:

1. Select Edit, and then Unlock to unlock either the entire system or the current board. The current board is highlighted.

2. Select OK.

3. Select System, then Verify.

	Starting the ECU From a Fixed Disk
Options
	Although we recommend that you start this utility from
	the System Configuration diskette, you can start the
	utility from your fixed disk if you have MS-DOS
	installed on it.

NCR S10XL Hot Plug Server User Guide 5-17