NCR S10XL manual Table D-1

Hot Plug Backplane

SCSI Channel Configurations

Table D-1

Terminator Settings for Single- Channel Configuration

Table D-1 lists the terminator settings for the single- channel configuration.

Terminator	Setting
With External Device
RA1, RA2, RA3	Removed
RA4, RA5, RA6	Removed (see note)
Without External Device
RA1, RA2, RA3	Installed
RA4, RA5, RA6	Removed

Note: For configurations with external device, terminate the signal at the external device. Also, be sure the terminator switches are set to the left (combine) position when installing a single-channel configuration. See Figure D-1.

D-6 NCR S10XL Hot Plug Server User Guide